For help with setups and other technical issues.
-
GilmourD
- PAT. # 2.972.923
- Posts: 2383
- Joined: Fri Apr 24, 2020 8:11 pm
- Location: Rutherford, NJ
Post
by GilmourD » Wed Dec 13, 2023 7:27 am
mekhem wrote: ↑Sat Sep 03, 2022 6:30 am
GuitarsnGravel wrote: ↑Fri Sep 02, 2022 6:04 pm
Why not take a screw out, go to your local hardware store and find a flat head machine screw replacement?
I was think about looking at flat heads - but wouldn't that require countersink on the plate? I know just enough about hardware to be dangerous.
FMIC assets diagram - SCREW M 8-32 X 1/4
so a flat head machine screw 8-32 1/4?
So, sorry to bump an oldie, but this is also a goldie!
So, the AVRI trem is the 8-32 x 1/4", correct?
Does anybody know the size for the import trem equivalent?
-
FritzCat
- PAT PEND
- Posts: 8
- Joined: Wed Jan 25, 2017 8:18 pm
Post
by FritzCat » Sat Dec 16, 2023 7:30 pm
I go a different route, I add little pieces of shrink tubing over the wrapped ends of the strings to dampen any vibrations:
-
timtam
- PAT. # 2.972.923
- Posts: 2855
- Joined: Sun Oct 22, 2017 2:42 am
- Location: Melbourne
Post
by timtam » Sat Dec 16, 2023 10:51 pm
GilmourD wrote: ↑Wed Dec 13, 2023 7:27 am
Does anybody know the size for the import trem equivalent?
The 3 screws on a CP trem measure as M4 x 6mm.
"I just knew I wanted to make a sound that was the complete opposite of a Les Paul, and that’s pretty much a Jaguar." Rowland S. Howard.
-
GilmourD
- PAT. # 2.972.923
- Posts: 2383
- Joined: Fri Apr 24, 2020 8:11 pm
- Location: Rutherford, NJ
Post
by GilmourD » Sat Dec 16, 2023 11:01 pm
timtam wrote: ↑Sat Dec 16, 2023 10:51 pm
GilmourD wrote: ↑Wed Dec 13, 2023 7:27 am
Does anybody know the size for the import trem equivalent?
The 3 screws on a CP trem measure as M4 x 6mm.
Cool, thanks!
I imagine they're the same on, say, a Classic Vibe trem or the AllParts trem with a lock?
