Re: What's on your workbench right now?
Posted: Sun Apr 18, 2021 6:46 pm
The Height logo is cool.
I'd make the 'eight part of it slightly bigger.
I'd make the 'eight part of it slightly bigger.
Talk about the Fender Jazzmaster, Jaguar, and any other offset waist guitars with us!
https://offsetguitars.com/forums/
I think you're right, I'll play around with the size. Thanks for the feedback!CROSS_guitars wrote: ↑Sun Apr 18, 2021 6:46 pmThe Height logo is cool.
I'd make the 'eight part of it slightly bigger.
I'm so glad I saw this post. Been trying to come up with a solution to use a faction mustang plate but wasn't sure how I would go about mounting the springs. Never even thought about using those nuts. Does the trem work well with them? Any tricks to them?Deed_Poll wrote: ↑Thu Apr 22, 2021 10:13 amSome Marauder bits
The last pieces of the puzzle were the offset roller pot mounting brackets - I managed to find an excellent company nearby who laser cut steel and have full bending capabilities, so was able to send them my design and received them in good time.
On the subject of the hooks / springs, I'm not 100% sure what the effect will be - but judging by the pictures I've seen of the original Marauder II Prototype, I believe they were doing something similar to this - you can see two bolt heads in the same position as I have them here, instead of the hooks being punched and bent as they were on the Mustang and as I'm sure they would have been on the Marauder had it made full production.AcrylicSuperman wrote: ↑Fri Apr 23, 2021 12:42 pmI'm so glad I saw this post. Been trying to come up with a solution to use a faction mustang plate but wasn't sure how I would go about mounting the springs. Never even thought about using those nuts. Does the trem work well with them? Any tricks to them?Deed_Poll wrote: ↑Thu Apr 22, 2021 10:13 amSome Marauder bits
The last pieces of the puzzle were the offset roller pot mounting brackets - I managed to find an excellent company nearby who laser cut steel and have full bending capabilities, so was able to send them my design and received them in good time.
Dan is up to his wizardry once again. Always great to seeDeed_Poll wrote: ↑Thu Apr 22, 2021 10:13 amSome Marauder bits
The last pieces of the puzzle were the offset roller pot mounting brackets - I managed to find an excellent company nearby who laser cut steel and have full bending capabilities, so was able to send them my design and received them in good time.
I'm VERY interested to see what you find. Please let us know how things work after you put the pots in!Tweedsuitcase wrote: ↑Mon May 03, 2021 12:32 pmAbout to wire my lefty pots "backwards" and see if I get a useable tone control out of it. If this works, I'll see if I mind them rolling backwards, or if I want to track down reverse log pots.
ok, so the tone knob seems to have a subtle effect through the range now - more pronounced at the very end of the range, but does roll off highs through the middle of the range.Shadoweclipse13 wrote: ↑Mon May 03, 2021 1:35 pmI'm VERY interested to see what you find. Please let us know how things work after you put the pots in!Tweedsuitcase wrote: ↑Mon May 03, 2021 12:32 pmAbout to wire my lefty pots "backwards" and see if I get a useable tone control out of it. If this works, I'll see if I mind them rolling backwards, or if I want to track down reverse log pots.