7.25" replacements necks for Jazzmaster

Talk about modding or building your own guitar from scratch.
Post Reply
User avatar
geeguy
PAT PEND
PAT PEND
Posts: 4
Joined: Sun Nov 28, 2021 6:19 am

7.25" replacements necks for Jazzmaster

Post by geeguy » Sun Nov 28, 2021 7:30 am

Hi All

I have a preference for 7.25" necks. Unfortunately Allparts JZRO is a 9.5.

I was thinking of going with Musikraft but understand they are stretched due to Covid. Anyone have a current or recent order with them who can share how long they are currently taking for neck orders?

And does anyone have any other suggestions for a 7.25 Jazzmaster neck.

Many thanks

User avatar
countertext
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 4148
Joined: Wed Sep 28, 2011 6:25 pm
Location: Tacoma

Re: 7.25" replacements necks for Jazzmaster

Post by countertext » Sun Nov 28, 2021 7:39 am

Warmoth does 7.25” radius necks. You can get a neck that is more or less vintage spec all around from them, you just have to go through a lot of little drop-down feature selections to get it.

User avatar
smjenkins
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1558
Joined: Fri Oct 08, 2010 5:45 am
Location: The Emerald Fucking City

Re: 7.25" replacements necks for Jazzmaster

Post by smjenkins » Sun Nov 28, 2021 8:09 am

I was part of the Musikraft Marauder neck group buy. That was a ~3 month turnaround. Warmoth will likely be a bit faster assuming you don't get a finish on your neck (which Musikraft doesn't offer as an option). Basically, if you're ordering something custom, it's a multi-month wait. Covid made things a bit worse, but custom stuff just takes time.

User avatar
MayTheFuzzBeWithYou
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2423
Joined: Mon Jul 03, 2017 12:28 am
Location: Linz, Austria

Re: 7.25" replacements necks for Jazzmaster

Post by MayTheFuzzBeWithYou » Sun Nov 28, 2021 10:21 am

Is 7,25“ the only thing you need? Any specifics aestheticwise?
About a year I bought a Classic 60s Lacquer JM for my Telemaster and it‘s a damn fine neck!
It‘s Pau Ferro - but properly oiled it got far more character than all my Rosewood necks combined. But I just looked and it seems to be discontinued/sold out everywhere. At least in Europe...

Other than that: the Stratosphere has an Allparts Big Headstock (CBS 70s Strat) 7,25“ neck with Rosewood fingerboard. Close enough for you or do you insist on the JM headstock shape?
https://stratosphereparts.com/allparts- ... 11-5-21-7/

User avatar
geeguy
PAT PEND
PAT PEND
Posts: 4
Joined: Sun Nov 28, 2021 6:19 am

Re: 7.25" replacements necks for Jazzmaster

Post by geeguy » Sun Nov 28, 2021 5:02 pm

Thanks all.

I like to keep Fenders at 7.25" but 9.5" is no problems. For this particular JM build, however, I want to keep it as close as possible to vintage specs - 7.25" radius, 1-5/8" nut width, rosewood board and a headtsock shape as close to vintage correct as possible.

Musikraft looks like the best option for this, just have to accept the wait times.

User avatar
fuzzking
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 10319
Joined: Wed Nov 22, 2006 2:06 am
Contact:

Re: 7.25" replacements necks for Jazzmaster

Post by fuzzking » Mon Nov 29, 2021 4:31 pm

my experience is limited to a few aftermarket manufacturers, but the Musikraft neck is the only one I kept. It's stellar
Nobody exists on purpose.

Post Reply