Hi all
i ve buy a squier jazzmaster and i put on 2 P rails from seymour duncan
But the strings don t be correctly aligned cause the correct spacing it s between 1,9685
i ve see many thing, like to replace by a tune o matic from gibson with Göldo "Excenter" Adapter-Bushings
But the radius off a gibson isn t 9.5 like my jazzmaster
can you help me ?
regards
help for a jazzmaster bridge
- GilmourD
- PAT. # 2.972.923
- Posts: 1773
- Joined: Fri Apr 24, 2020 8:11 pm
- Location: Rutherford, NJ
Re: help for a jazzmaster bridge
Given the amount of guitars with Fenders with vintage-spaced Strat bridges or Floyd Roses and vintage-spaced Gibson humbuckers in the bridge that have no actual performance issues, you should be fine as is.arkham wrote: ↑Thu Dec 14, 2023 8:15 amHi all
i ve buy a squier jazzmaster and i put on 2 P rails from seymour duncan
But the strings don t be correctly aligned cause the correct spacing it s between 1,9685
i ve see many thing, like to replace by a tune o matic from gibson with Göldo "Excenter" Adapter-Bushings
But the radius off a gibson isn t 9.5 like my jazzmaster
can you help me ?
regards
- MayTheFuzzBeWithYou
- PAT. # 2.972.923
- Posts: 2430
- Joined: Mon Jul 03, 2017 12:28 am
- Location: Linz, Austria
Re: help for a jazzmaster bridge
I had P-Rails in a Jag and they sounded great. The mismatched radius wasn‘t really an issue.
- arkham
- PAT PEND
- Posts: 3
- Joined: Wed May 24, 2023 9:35 pm
Re: help for a jazzmaster bridge
The mistake is simple, le last chord E, is at the edge of the handle
- GilmourD
- PAT. # 2.972.923
- Posts: 1773
- Joined: Fri Apr 24, 2020 8:11 pm
- Location: Rutherford, NJ
Re: help for a jazzmaster bridge
Do you mean the E strings are falling off the edges of the neck/fretboard? If so, that's a different problem, but also not a problem you should have with a factory-installed Squier Jazzmaster bridge.
Can you please post pictures of what you mean?