Strings for Baritone Jazzmaster

For help with setups and other technical issues.
Post Reply
User avatar
CorporateDisguise
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 780
Joined: Sun Mar 08, 2015 9:56 am
Location: NY

Strings for Baritone Jazzmaster

Post by CorporateDisguise » Fri Jan 07, 2022 6:15 pm

I recently put together a baritone Jazzmaster, but when I went to string it up, the high E was an inch to short. I used Daddario 12-60 set. It didn’t say it was specifically for Baritones, but it did say it was optimized for c to c tuning. I’ve seen a few of you here with baritone Jazzys, so I figured I’d ask before blindly buying more strings. It’s a 28 5/8 scale, and has the trem on, so the high e needs to be about 40 inches long.

Any help would be greatly appreciated.

User avatar
schroeder
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 67
Joined: Fri Feb 10, 2012 11:57 am
Location: Michigan

Re: Strings for Baritone Jazzmaster

Post by schroeder » Fri Jan 07, 2022 8:14 pm

I am using the D'Addario 13-62 set, which does say baritone on it. There was plenty of length - but, although it is a Jazzmaster body with the same scale length as yours, I have top loading fixed bridge. Tuned to B-B, the string tension is about the same a a standard guitar with 10's on it, so no need to worry about the tension of a thicker set. I would look for a baritone set to get that extra length.

User avatar
s_mcsleazy
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 18443
Joined: Thu Jul 28, 2011 7:30 am
Location: glasgow

Re: Strings for Baritone Jazzmaster

Post by s_mcsleazy » Fri Jan 07, 2022 11:14 pm

my experience with baritone strings is basically even brands are inconsistent when it comes to length.
Image

the big problem imho is the high b string. most times i've found daddario strings work but i've also had a few sets that have been a little short. granted, i use these ones in b-b
https://www.daddario.com/products/guita ... ium-14-68/

i've found the ernieball ones are ALWAYS too small. like ALWAYS.
offset guitars resident bass player.
'Are you trying to seduce me Mrs Robinson? Or do you just want me to solder a couple of resistors into your Muff?'

User avatar
Lost In Autumn
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 886
Joined: Sun Jul 05, 2020 3:01 am
Location: Philadelphia
Contact:

Re: Strings for Baritone Jazzmaster

Post by Lost In Autumn » Sat Jan 08, 2022 3:43 am

schroeder wrote:
Fri Jan 07, 2022 8:14 pm
I am using the D'Addario 13-62 set, which does say baritone on it. There was plenty of length - but, although it is a Jazzmaster body with the same scale length as yours, I have top loading fixed bridge. Tuned to B-B, the string tension is about the same a a standard guitar with 10's on it, so no need to worry about the tension of a thicker set. I would look for a baritone set to get that extra length.
I use these strings on both of my 28" scale baritones, one is a Jagmaster, with a strat-style tremolo, the other is a Jazzmaster, with a Floating Tremolo. I don't have any fitment issues, although I may have had to ream out the lowest tuning peg to fit the string.

User avatar
adamrobertt
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2411
Joined: Sun Mar 28, 2010 10:28 am
Contact:

Re: Strings for Baritone Jazzmaster

Post by adamrobertt » Sat Jan 08, 2022 5:12 am

I like LaBella. I have a Danelectro baritone that has a 29" scale and the strings were still massively overlength. I can't imagine them not being long enough.

https://www.labella.com/product/bge-l-e ... one-light/

User avatar
CorporateDisguise
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 780
Joined: Sun Mar 08, 2015 9:56 am
Location: NY

Re: Strings for Baritone Jazzmaster

Post by CorporateDisguise » Sat Jan 08, 2022 6:51 am

Thanks everyone! I’ll give the Daddario set a shot.

Post Reply