Keeping exhibit Fiddy 3 thread after some work, aka the mystery Japanese Mustang..

Discussion of vintage Jazzmasters, Jaguars, Bass VIs, Electric XIIs and any other offset-waist instruments.
Post Reply
User avatar
Fiddy
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 12402
Joined: Thu Nov 29, 2007 11:38 am
Location: Canada Dry

Keeping exhibit Fiddy 3 thread after some work, aka the mystery Japanese Mustang..

Post by Fiddy » Fri Nov 24, 2023 12:05 pm

This was a fixer upper Mustang i picked up that needed some work to make it playable...

The bridge it came with was all kinds of fucked. I replaced it today, and in doing so, i also realized i had over-tightened the truss rod by about a full turn to compensate :fp:

Image

Image

The frets needed a fret level badly.

The body had some ugly scratches in the back too. Enlarge the image below to see them...

Image

And last but not least, the headstock had overspray from the Fender decal someone stupidly applied.

So, i leveled the frets, put some shims on the neck, dialed back the trussrod quite a bit and buffed the scratches out and orange peel with a heavy cut compound and an orbital polisher.

Here are the results. The scratches have almost disappeared. I think the back looks much better.
The overspray is gone. Buffed out. I kinda want to get a 'copy' decal in a tele style font and add it there .. Yes a decal that says the word 'copy'

The new 52mm spaced bridge allows for great action, and playability.

I got some alnico pickups coming for it too.

Oh and I also realigned the tuners, still not perfect because they are slightly different than the originals but they look much better now I think think.

Here are some pics from today.

Image

Image

Image

Image

Image

Image

Image

User avatar
Biloxide
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 152
Joined: Fri Jul 28, 2023 11:36 am

Re: Keeping exhibit Fiddy 3 thread after some work, aka the mystery Japanese Mustang..

Post by Biloxide » Fri Nov 24, 2023 1:43 pm

Nice revival!!!
What is that ? A pot washer under the low e saddle... the bridge need a good soak in a bath of diesel and let's go playing on another frying pan ;D !!!

User avatar
MattK
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 3664
Joined: Sun Aug 10, 2008 9:51 pm
Location: Hobart, Australia

Re: Keeping exhibit Fiddy 3 thread after some work, aka the mystery Japanese Mustang..

Post by MattK » Fri Nov 24, 2023 1:46 pm

Fine, fine work, outstanding result. I can send you a decal if you like!

User avatar
Fiddy
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 12402
Joined: Thu Nov 29, 2007 11:38 am
Location: Canada Dry

Re: Keeping exhibit Fiddy 3 thread after some work, aka the mystery Japanese Mustang..

Post by Fiddy » Fri Nov 24, 2023 2:51 pm

You make decals? :ph34r:

User avatar
MattK
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 3664
Joined: Sun Aug 10, 2008 9:51 pm
Location: Hobart, Australia

Re: Keeping exhibit Fiddy 3 thread after some work, aka the mystery Japanese Mustang..

Post by MattK » Fri Nov 24, 2023 3:53 pm

Sure! Can do anything other than metallics or white

User avatar
Fiddy
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 12402
Joined: Thu Nov 29, 2007 11:38 am
Location: Canada Dry

Re: Keeping exhibit Fiddy 3 thread after some work, aka the mystery Japanese Mustang..

Post by Fiddy » Fri Nov 24, 2023 4:02 pm

Oh yeah, that'd be awesome. Just the copy portion would be cool. :w00t:

Post Reply