Page 102 of 102

Re: The Synth Thread...

Posted: Tue Jul 20, 2021 8:56 am
by Shadoweclipse13
Maggieo wrote:
Tue Jul 20, 2021 8:27 am
mackerelmint wrote:
Mon Jul 19, 2021 7:02 pm
NICE ONE, JASON! :w00t:

Those UDOs sound incredible, there's just no getting around that. I'm so stoked for you. That and the ASM Hydrasynth are the most interesting recent synths out there, IMO. Man, the demos I've heard of those UDOs... :?
Seconded! :w00t:
Thanks Maggie!!! When I figure out how to play it better, maybe I'll post some audio clips ;)

Re: The Synth Thread...

Posted: Tue Jul 20, 2021 11:21 am
by mackerelmint
Shadoweclipse13 wrote:
Tue Jul 20, 2021 5:27 am
You're not kidding. The second I heard the binaural offset in a demo, I was like "want!". I've never heard demos of the Hydrasynth, I'll have to look that up!
It's super cool, and surprisingly affordable. It has poly aftertouch, too!

Re: The Synth Thread...

Posted: Wed Jul 21, 2021 4:52 am
by redchapterjubilee
Ain't much electro music you can't make with those two boards.

Re: The Synth Thread...

Posted: Tue Aug 03, 2021 1:14 pm
by mackerelmint
Behringer just announced a Jupiter-8 clone.

I bet it comes out before the UB-Xa does.

Re: The Synth Thread...

Posted: Thu Aug 05, 2021 8:58 am
by matbard
The Jupiter 8 clone is still at mechanical design stage

Re: The Synth Thread...

Posted: Mon Aug 23, 2021 6:19 am
by Shadoweclipse13
So, I emailed UDO about a factory cover for the Super 6, and they said that they don't make them, but that they've partnered with a company who does. It turns out that this company, Decksaver, also makes one for Moog Matriachs. So, I bought one of each ;D

Re: The Synth Thread...

Posted: Tue Aug 24, 2021 5:00 am
by redchapterjubilee
Everyone see this? https://www.synthtopia.com/content/2021 ... n-effects/ Sequential Take 5. 5 voices of Prophet in a Pro 3 box. $1250.

https://www.youtube.com/watch?v=1t1Sh0BX8-U

I didn't notice at first but apparently it can be used WYSIWYG and then to access the presets you put it into preset mode (like my Juno 106). I've been holding out for whichever Behringer poly makes it to the market first but this is tempting.

Re: The Synth Thread...

Posted: Tue Aug 24, 2021 2:02 pm
by Singlebladepickup
redchapterjubilee wrote:
Tue Aug 24, 2021 5:00 am
Everyone see this? https://www.synthtopia.com/content/2021 ... n-effects/ Sequential Take 5. 5 voices of Prophet in a Pro 3 box. $1250.

https://www.youtube.com/watch?v=1t1Sh0BX8-U

I didn't notice at first but apparently it can be used WYSIWYG and then to access the presets you put it into preset mode (like my Juno 106). I've been holding out for whichever Behringer poly makes it to the market first but this is tempting.
Yeah, it's also got a ton of effects and "vintage knob" for analog detune. It does look very nice.

Re: The Synth Thread...

Posted: Wed Sep 08, 2021 6:56 pm
by Shadoweclipse13
Shadoweclipse13 wrote:
Mon Aug 23, 2021 6:19 am
So, I emailed UDO about a factory cover for the Super 6, and they said that they don't make them, but that they've partnered with a company who does. It turns out that this company, Decksaver, also makes one for Moog Matriachs. So, I bought one of each ;D
They came the other day!!! I am really loving the Decksaver covers. A single piece of vacuum-formed plastic, where it doesn't touch the knobs, and where water can only roll off the side if there was a spill. And the best part? They are clear, so you can still see the cool looking synths while they are protected.

Image
Image

I got one for my Drumbrute Impact too!
Image
Image

Re: The Synth Thread...

Posted: Thu Sep 09, 2021 9:47 am
by Maggieo
Dead sexy.

Re: The Synth Thread...

Posted: Thu Sep 09, 2021 10:23 am
by Shadoweclipse13
Thanks Maggie ;D

Now I just want to figure out a stand to the side so I can have my mixing board, recording device, and Drumbrute Impact close at hand! So much to do!!

Re: The Synth Thread...

Posted: Tue Oct 12, 2021 2:10 am
by mackerelmint
https://www.ondemagnetique.com/

I've been wanting one of these for several years now. I put myself on the list, but for two years in a row he's sent me all the emails EXCEPT the one letting us know they're ready to buy. Happened the first time, I emailed him, we talked, and then the next year it happened again. So I'm certainly not holding my breath for this guy to come through for me.

Today I saw this video. And what a wonderful thing to have directions on rolling one's own! It'd be trivial to give it 8 or even 12 keys. What the OM-1 has over this one IMO is the cv input. Not knowing much about cv other than that it stands for "control voltage" and the obvious information the name conveys, somehow I doubt it's terribly complicated and I'm sure the internet's vast resources can school me.

Where this DIY job beats the OM-1 in my book is the use of the cheapest, most easily available tape recorder that exists brand new rather than a specific and relatively expensive Sony model that drives availability. So, this is now on my "to make" list. Cool that I don't have to wait indefinitely for some guy to deign to sell me one.

Re: The Synth Thread...

Posted: Thu Oct 14, 2021 6:46 pm
by BlixaFan
Shadoweclipse13 wrote:
Thu Sep 09, 2021 10:23 am
Thanks Maggie ;D

Now I just want to figure out a stand to the side so I can have my mixing board, recording device, and Drumbrute Impact close at hand! So much to do!!
looks killer! i should get one of those for my Prophet 6!

Re: The Synth Thread...

Posted: Fri Oct 15, 2021 2:53 am
by Shadoweclipse13
BlixaFan wrote:
Thu Oct 14, 2021 6:46 pm
Shadoweclipse13 wrote:
Thu Sep 09, 2021 10:23 am
Thanks Maggie ;D

Now I just want to figure out a stand to the side so I can have my mixing board, recording device, and Drumbrute Impact close at hand! So much to do!!
looks killer! i should get one of those for my Prophet 6!
Thanks! I'm pretty sure I saw most of the p
Prophets as an available cover on the site when I looked around.