Re: your effects setup?

Everyone needs a stompbox.
Post Reply
User avatar
zhivago
Mods
Mods
Posts: 21926
Joined: Tue Sep 12, 2006 6:18 am
Location: London, UK

Re: your effects setup?

Post by zhivago » Mon Feb 21, 2022 12:26 am

i love sharin foo wrote:
Sun Feb 20, 2022 4:10 pm
zhivago wrote:
Thu Feb 17, 2022 2:28 pm
Having fun with these little guys... :-*

Image
There really isn’t much that you couldn’t do with that setup 8) !
I've been rocking it for a solid week and I am getting so many great sounds! :-*

I actually finally managed to score an early 2000s MJM Brit Bender (2 knob - it's a Tone Bender MKII, basically) that might join the trio...let's see how it goes...it should arrive sometime this week. 8)
Resident Spartan.

User avatar
soggy mittens
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2086
Joined: Fri May 02, 2014 2:08 am
Location: middle of somewhere

Re: your effects setup?

Post by soggy mittens » Wed Mar 02, 2022 11:51 pm

2021 was a brutal year for a lot of people and for myself it saw the end of a five year project, a really unfortunate situation. Five years ruined in five minutes from me making one mistake, just goes to show how easy it is. Regardless I have two choices, take the songs and find new players or take the tracks that have been recorded and try to record as much as possible myself to a level that is acceptable and piece it all together and call it done. Either way I don't want to give up on this project as it has been my only real interest the past seven years, the last year has been the lowest of lows to the point of reduced physical strength, I tried playing guitar today and my right arm kept getting sore, but I'm not going to give up.

My main board is pretty much the same as it ever was, and the other (that I will use to re-record the rhythm guitar parts) is spruced up a little, I want to wedge a tremolo in there somewhere and try and get some use of that as well, shoehorn as many effects on the albums as I can.

Image

EDIT:
Image
Last edited by soggy mittens on Mon Mar 21, 2022 7:50 pm, edited 1 time in total.
If OSG has tort me anything...

User avatar
Zork
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1811
Joined: Thu Jan 19, 2012 7:01 am
Location: Bremen, Germany

Re: your effects setup?

Post by Zork » Sat Mar 12, 2022 12:42 am

This is work in progress:
Image

The pedals aren't attached yet and the wiring is a rats nest but it all fits on the board somehow. I needed a new power supply because I had only 5 outlets but 4 pedals that refuse to share power and the rest combined would eat too much miliamperes. The Harley Benton ps is great but pretty big and I was worried it wouldn't fit, but yeah - success... 8)
If only the Line Selector didn't have the jacks in all the wrong places. :fp: It simply operates as an A/B box to switch to the racktuner. So does anyone know of an A/B with a good buffer and top mount jacks? That would safe me from a lot of hassle...

User avatar
Chippertheripper
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 857
Joined: Sun Dec 30, 2012 1:53 pm
Location: SE mass

Re: your effects setup?

Post by Chippertheripper » Sat Mar 12, 2022 5:29 am

Live:
Image


Home:
Image
This is intended on being a blank sonic canvas where I can make any noise I want. The rat may go eventually for some kind of weird sauce or modulation sometime.

User avatar
Unicorn Warrior
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 3491
Joined: Sun Jul 22, 2012 5:58 pm
Location: Kentucky, USA

Re: your effects setup?

Post by Unicorn Warrior » Wed Mar 16, 2022 7:39 am

Chippertheripper wrote:
Sat Mar 12, 2022 5:29 am
Live:
Image


Home:
Image
This is intended on being a blank sonic canvas where I can make any noise I want. The rat may go eventually for some kind of weird sauce or modulation sometime.
What is the pedal on the upper left?

User avatar
Chippertheripper
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 857
Joined: Sun Dec 30, 2012 1:53 pm
Location: SE mass

Re: your effects setup?

Post by Chippertheripper » Wed Mar 16, 2022 8:29 am

Unicorn Warrior wrote:
Wed Mar 16, 2022 7:39 am

What is the pedal on the upper left?
It’s a surfy bear reverb/trem (kits) that I finally put together after sitting on them for years now.
The catalyst was discovering that sb had accutronics make them a pan to spec that completes the 6g15 mosfet conversion.

User avatar
gibs
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 278
Joined: Mon Aug 01, 2011 5:03 pm
Contact:

Re: your effects setup?

Post by gibs » Sat Mar 19, 2022 2:14 pm

Don’t post much this side of the forum, but here’s mine.
Image

User avatar
fuzzjunkie
Expat
Expat
Posts: 7277
Joined: Thu Oct 12, 2006 11:32 am
Location: Seattle

Re: your effects setup?

Post by fuzzjunkie » Sat Mar 19, 2022 7:37 pm

gibs wrote:
Sat Mar 19, 2022 2:14 pm
Don’t post much this side of the forum, but here’s mine.
Image
I haven’t seen a collection of Source Audio pedals as big as that before.

User avatar
gibs
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 278
Joined: Mon Aug 01, 2011 5:03 pm
Contact:

Re: your effects setup?

Post by gibs » Sat Mar 19, 2022 8:15 pm

fuzzjunkie wrote:
Sat Mar 19, 2022 7:37 pm
gibs wrote:
Sat Mar 19, 2022 2:14 pm
Don’t post much this side of the forum, but here’s mine.
Image
I haven’t seen a collection of Source Audio pedals as big as that before.
Perks of the Job (I work for source audio) ;)

So I guess this is my official announcement here (I’m pretty active on talkbass and the gear page for support, but I’ve been on OSG longer those, just now finally got my offset last October, I know, for shame) but fee free to message or tag me on all things source audio.

User avatar
JSett
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 8804
Joined: Mon Jun 01, 2009 1:33 pm
Location: Old Hampshire, Old England

Re: your effects setup?

Post by JSett » Sat Mar 19, 2022 10:11 pm

gibs wrote:
Sat Mar 19, 2022 2:14 pm
Don’t post much this side of the forum, but here’s mine.
Image
What I want to know is, are the Korg and POG couple the new arrivals and 'bringing down the neighborhood' (much to the shock and dismay of the local homeowners association) or was the board previously multicultural and varied but has been gentrified over time...pushing all the old residents out and replacing them with the ol' tickytacky?
Silly Rabbit, don't you know scooped mids are for kids?

User avatar
fuzzjunkie
Expat
Expat
Posts: 7277
Joined: Thu Oct 12, 2006 11:32 am
Location: Seattle

Re: your effects setup?

Post by fuzzjunkie » Sun Mar 20, 2022 9:20 am

I only have a Reflex atm, but it’s a core pedal on my board.

Image

I keep thinking about a smaller board that would have an EQ2 and a Collider, along with a LEM and a couple of fuzz pedals.

User avatar
zhivago
Mods
Mods
Posts: 21926
Joined: Tue Sep 12, 2006 6:18 am
Location: London, UK

Re: your effects setup?

Post by zhivago » Sun Mar 20, 2022 11:44 am

Image
Resident Spartan.

User avatar
gibs
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 278
Joined: Mon Aug 01, 2011 5:03 pm
Contact:

Re: your effects setup?

Post by gibs » Sun Mar 20, 2022 5:38 pm

johnnysomersett wrote:
Sat Mar 19, 2022 10:11 pm
gibs wrote:
Sat Mar 19, 2022 2:14 pm
Don’t post much this side of the forum, but here’s mine.
Image
What I want to know is, are the Korg and POG couple the new arrivals and 'bringing down the neighborhood' (much to the shock and dismay of the local homeowners association) or was the board previously multicultural and varied but has been gentrified over time...pushing all the old residents out and replacing them with the ol' tickytacky?
Pog2 is the oldest pedal I still use (kids play with my old stuff) use the korg as my EQ2 (built in tuner) is in the fx loop, and I like having my tuner first in change for best accuracy/least amount of turning off pitch altering effects that would mess with tuning accuracy. Used to use 2 soleman midi controllers and a disaster area smart switch for amp control, but replaced with the airstep as it works better as a complimentary controller to the soleman, and can control my amp channel as well, making space for more pedals. Under the board is scary, I’ll have to see if I got a photo of that mess, took about 4 hours to wire up everything. The board I built from scratch out of aluminum a la pedaltrain style. I’ve got a couple videos of the process if anyones interested.

Started working for SA in 2019, before then, I was one of there for to beta testers, so got a lot of things pre release and helped figure out feature set, and debugging. I did buy my first SA pedal for full price, before I began that relationship. Had a number of ehx, line6 tone core, visual sound stuff over the years before getting acquainted with SA gear, (did jump on until the early days of the one series, that soundblox line…….. sound good, but very different looking :-X )

User avatar
Unicorn Warrior
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 3491
Joined: Sun Jul 22, 2012 5:58 pm
Location: Kentucky, USA

Re: your effects setup?

Post by Unicorn Warrior » Mon Mar 21, 2022 11:58 am

fuzzjunkie wrote:
Sun Mar 20, 2022 9:20 am
I only have a Reflex atm, but it’s a core pedal on my board.

Image

I keep thinking about a smaller board that would have an EQ2 and a Collider, along with a LEM and a couple of fuzz pedals.
Very neat pedalboard. Mine is in a similar enclosure. May be the same size as well. What are the 3 silver pedals in the upper right?

User avatar
fuzzjunkie
Expat
Expat
Posts: 7277
Joined: Thu Oct 12, 2006 11:32 am
Location: Seattle

Re: your effects setup?

Post by fuzzjunkie » Mon Mar 21, 2022 7:01 pm

Unicorn Warrior wrote:
Mon Mar 21, 2022 11:58 am
fuzzjunkie wrote:
Sun Mar 20, 2022 9:20 am
I only have a Reflex atm, but it’s a core pedal on my board.

Image

I keep thinking about a smaller board that would have an EQ2 and a Collider, along with a LEM and a couple of fuzz pedals.
Very neat pedalboard. Mine is in a similar enclosure. May be the same size as well. What are the 3 silver pedals in the upper right?
I think it’s 24X16, or close to that?

The 3 pedals from left to right: Basic Audio Scarab Deluxe, Fairfield Circuitry Four Eyes, and Basic Audio Gnarly fuzz.

Post Reply