Rotary speaker sounds on the semi-cheap?

Everyone needs a stompbox.
User avatar
ElephantDNA
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 190
Joined: Wed Nov 22, 2017 12:14 pm

Re: Rotary speaker sounds on the semi-cheap?

Post by ElephantDNA » Sat Apr 03, 2021 6:20 pm

marqueemoon wrote:
Sat Apr 03, 2021 8:32 am
ElephantDNA wrote:
Fri Apr 02, 2021 8:51 am
Yeah I actually picked up a phase 45 myself recently. Really digging it though I am experiencing some amount of volume loss. Will have to try putting it in different areas of the chain to see if I can make it a little louder. Bass player is a beast, so I'm turned up pretty high most of the time.

I find with the phase45 after about 3 o'clock you can nail this type of tone. And as you said, the rotary itself is a bit over the top. The phase 45 at a lower setting gives just a really nice shimmer to your playing that is subtle but really nice. Great choice!

Well, shit. They canceled my order. I’m guessing it either sold in person and hadn’t been pulled from the site yet or somebody determined it was way underpriced and pulled it. I’m going to express my annoyance to them as another option I was considering for similar money is now gone.

How bad is tone suck with the unmodded stock version when off?
When off I don't have a huge issue with it to be honest. It actually works pretty much fine. Just when I engage it it's definitely a noticeable volume drop. I think I can probably move it somewhere after drive pedals and it might work better. I just haven't gotten that far into exploring it quite yet.

User avatar
marqueemoon
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 4580
Joined: Mon Jun 20, 2016 9:37 pm
Location: Seattle

Re: Rotary speaker sounds on the semi-cheap?

Post by marqueemoon » Mon Apr 05, 2021 1:55 pm

Ok, the volume drop is a bit of a bummer for me. After further research I just pulled the trigger on a Maxon PT999. It’s 4 stage, so a little less subtle, but in all the demos I checked out it was one of my favorites.

From what I understand there are internal trimmers for depth and center frequency, so I should be able to dial back the depth if needed and still have a live performance -friendly single knob interface.

User avatar
ElephantDNA
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 190
Joined: Wed Nov 22, 2017 12:14 pm

Re: Rotary speaker sounds on the semi-cheap?

Post by ElephantDNA » Tue Apr 06, 2021 3:13 pm

marqueemoon wrote:
Mon Apr 05, 2021 1:55 pm
Ok, the volume drop is a bit of a bummer for me. After further research I just pulled the trigger on a Maxon PT999. It’s 4 stage, so a little less subtle, but in all the demos I checked out it was one of my favorites.

From what I understand there are internal trimmers for depth and center frequency, so I should be able to dial back the depth if needed and still have a live performance -friendly single knob interface.
I'm sure it'll get the job done here. I think as far as the pseudo-rotary aspect you'll probably find without an issue as you turn it up - most phasers can do a nice job of that and I'm sure this is no exception. The difference might be in the more subtle aspect. The Phase 45 is kind of uniquely subtle in a certain way that I'm not sure is easy to find in other phasers. But definitely worth a shot and I'm sure you'll find a way to make it work. Nice buy!

Post Reply