Solderless cables

Everyone needs a stompbox.
sndansby
PAT PEND
PAT PEND
Posts: 49
Joined: Tue Aug 21, 2018 10:54 am

Solderless cables

Post by sndansby » Sun Nov 04, 2018 4:05 pm

Which solderless cable kits do you guys like. I bought the Boss one and I had to return it because it did not work and they sent another and that one did not work. I've seen Lava Cables and heard good things. What do you guys think?

User avatar
timtam
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2729
Joined: Sun Oct 22, 2017 2:42 am
Location: Melbourne

Re: Solderless cables

Post by timtam » Sun Nov 04, 2018 4:30 pm

What didn't work about the Boss ? Were you able to check continuity / no shorts with a multimeter ?

Looks straightforward ...
https://www.youtube.com/watch?v=3EHJU6Vc21k
... although once you've soldered cables the old-fashioned way it's hard to be really confident about the durability of any solderless system. ;)
"I just knew I wanted to make a sound that was the complete opposite of a Les Paul, and that’s pretty much a Jaguar." Rowland S. Howard.

User avatar
Futuron
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1213
Joined: Fri Nov 10, 2017 3:19 am
Location: Australia

Re: Solderless cables

Post by Futuron » Sun Nov 04, 2018 6:15 pm

Didn't know there was a Boss one. I've only used the Planet Waves one (DAddario I think). Works. Cables are very thick and rigid though (don't go around tight corners well). Plugs are probably too long for what most real-estate-conscious pedal boarders would prefer. Incredibly easy to use, solid, and I never had a loss of contact issue.

User avatar
Shadoweclipse13
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 12435
Joined: Fri Feb 07, 2014 9:22 pm
Location: Stuck in the dimension of imagination

Re: Solderless cables

Post by Shadoweclipse13 » Sun Nov 04, 2018 6:39 pm

I use the Evidence Audio Screw In Solderless system. They aren't cheap, but they're fantastic. Wouldn't use anything else.
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384

User avatar
Domm
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1303
Joined: Sun Dec 06, 2009 7:16 pm
Location: Boston

Re: Solderless cables

Post by Domm » Sun Nov 04, 2018 6:58 pm

Disaster plugs are nice

User avatar
smjenkins
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1547
Joined: Fri Oct 08, 2010 5:45 am
Location: The Emerald Fucking City

Re: Solderless cables

Post by smjenkins » Sun Nov 04, 2018 8:14 pm

Domm wrote:
Sun Nov 04, 2018 6:58 pm
Disaster plugs are nice
These are the ones I use. You can get the starter kit for a reasonable price on Reverb and then order bulk ends from the Disaster site as most of the pedal board connections you typically need don't require much cable.

sndansby
PAT PEND
PAT PEND
Posts: 49
Joined: Tue Aug 21, 2018 10:54 am

Re: Solderless cables

Post by sndansby » Mon Nov 05, 2018 9:57 am

Thanks guys

sndansby
PAT PEND
PAT PEND
Posts: 49
Joined: Tue Aug 21, 2018 10:54 am

Re: Solderless cables

Post by sndansby » Tue Nov 06, 2018 2:24 pm

has anyone used the lava cables?

User avatar
thisisnickpaige
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2048
Joined: Sun Feb 14, 2010 10:25 pm
Location: Oslo, Norway
Contact:

Re: Solderless cables

Post by thisisnickpaige » Wed Nov 07, 2018 6:09 am

Yup, i have a mix of Lava and George L. If you can spring for it get the thinner gauge wires, makes for nicer tighter wiring.

I prefer my George L set due only too the thinner gauge, however the Lava cable heads have a smaller head so you can use them in tighter spaces, which is rather nice.

As far as assembly goes they're both fairly straight forward, with the Lava cables being maybe slightly more complicated, but neither are really difficult. Read the manuals, watch some youtube videos and you'll be solderless in no time.

Tip:
Just make sure as you're plugging and unplugging over the years to check that the heads are still tightly fastened, or you will have problems. Nothing major, but a good tip.
Jesus

User avatar
øøøøøøø
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 5984
Joined: Sun Jan 06, 2008 8:26 pm
Location: Los Angeles
Contact:

Re: Solderless cables

Post by øøøøøøø » Wed Nov 07, 2018 10:19 am

I don't trust 'em period.

I have old-fashioned soldered cables that I've been using in rigorous nightly professional use for over a decade.

Solderless cables always fail under normal use for me, no matter how carefully-assembled.

User avatar
somanytoys
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 3325
Joined: Wed Feb 01, 2017 1:59 pm
Location: Baton Rouge, LA

Re: Solderless cables

Post by somanytoys » Thu Nov 08, 2018 1:40 pm

I use George L's, the right angles mostly, but they can easily become unscrewed and short out, and that can be a massive pain to chase down if you have a long or split chain, which would be murder at a show.

One thing that seems to help a lot is to get the sleeve stress relievers, it helps to keep the head screws from turning as much. I've had a massive reduction in that occurring by using the stress relievers. But when I switch the cables out/around on the board, I still test every one before I put it back in a chain. Another benefit is that the metal screw heads don't try to scratch other pedals with those things on.

I have to say that I've never had a problem with the straight head versions, the ones that use the small screw bit into the body at the cable, but those are harder to deal with on a pedalboard, I mostly use them for out cables (to an amp or whatever). I've also had good luck with their pre-made instrument cables, I've had a few of those for years now.
-David

It's a boost booster, to boost your boost - it makes your tone much muchier.

User avatar
fuzzjunkie
Expat
Expat
Posts: 7276
Joined: Thu Oct 12, 2006 11:32 am
Location: Seattle

Re: Solderless cables

Post by fuzzjunkie » Thu Nov 08, 2018 9:11 pm

I learned how to solder to fix and mod my guitars and build a pedal or two. Making your own cables isn’t that hard and they are less likely to fail.

I have no experience with solder less cables though.

User avatar
Futuron
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1213
Joined: Fri Nov 10, 2017 3:19 am
Location: Australia

Re: Solderless cables

Post by Futuron » Thu Nov 08, 2018 11:25 pm

fuzzjunkie wrote:
Thu Nov 08, 2018 9:11 pm
I learned how to solder to fix and mod my guitars and build a pedal or two. Making your own cables isn’t that hard and they are less likely to fail.
Not everyone has a steady hand though.

User avatar
Jaguar018
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 8045
Joined: Thu Nov 06, 2008 6:48 am
Location: Burbs of Washington DC

Re: Solderless cables

Post by Jaguar018 » Fri Nov 09, 2018 8:53 am

Whenever someone brings up solderless cables, a "just make yer own cables"* person is obligated to hop on. It's just one of those 'things' on guitar forums. :P

If you have a badly botched refinished guitar with mold, or the shape of a penis etched into it, that you want to restore invariably someone will chirp in with, "I'd rock that just it as is. Looks awesome!" The original Klons will always elicit opinions and around OSG, we'll never tire of talking about Mastery Bridges.

*(I have come close to getting the tools and figuring out how to do that, but I just don't have the time and space in my house. Maybe some day. Until then I am stuck with my George Ls, which I love and loathe at the same time.)

User avatar
somanytoys
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 3325
Joined: Wed Feb 01, 2017 1:59 pm
Location: Baton Rouge, LA

Re: Solderless cables

Post by somanytoys » Fri Nov 09, 2018 8:57 am

Jaguar018 wrote:
Fri Nov 09, 2018 8:53 am
*(I have come close to getting the tools and figuring out how to do that, but I just don't have the time and space in my house. Maybe some day. Until then I am stuck with my George Ls, which I love and loathe at the same time.)
Same here, especially considering the amount of money I had already sunk into them. But as I said above, using the head sleeves/stress relievers does make a huge difference in the reliability, and if you've already spent a lot of money on the heads & cable, it's not really that much more investment for the return.
-David

It's a boost booster, to boost your boost - it makes your tone much muchier.

Post Reply