ThePearDream's Talman Projects
- ThePearDream
- PAT. # 2.972.923
- Posts: 2072
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
Re: ThePearDream's Talman Projects
Do you like mockups?
I sure do. If you don't, kindly see your way out of my thread.
I sure do. If you don't, kindly see your way out of my thread.
Doug
@dpcannafax
@dpcannafax
- milkypostman
- PAT PEND
- Posts: 38
- Joined: Sat Oct 23, 2010 9:05 pm
- Location: Madison, WI
Re: ThePearDream's Talman Projects
What’s with the extra switch?
- ThePearDream
- PAT. # 2.972.923
- Posts: 2072
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
- ThePearDream
- PAT. # 2.972.923
- Posts: 2072
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
Re: ThePearDream's Talman Projects
Just finished drawing up the wiring diagram
It is essentially the Schaller diagram, but updated to show the strat pickups and the strangle switch.
Edit: updated wiring diagram
It is essentially the Schaller diagram, but updated to show the strat pickups and the strangle switch.
Edit: updated wiring diagram
Last edited by ThePearDream on Fri Sep 21, 2018 6:34 am, edited 1 time in total.
Doug
@dpcannafax
@dpcannafax
- Shadoweclipse13
- PAT. # 2.972.923
- Posts: 12435
- Joined: Fri Feb 07, 2014 9:22 pm
- Location: Stuck in the dimension of imagination
Re: ThePearDream's Talman Projects
That is really fantastic. The UHMW guard with the white witch hats is epic
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
- Rgand
- PAT. # 2.972.923
- Posts: 1171
- Joined: Sun Mar 05, 2017 3:55 pm
Re: ThePearDream's Talman Projects
I agree with this wholeheartedly.Shadoweclipse13 wrote: ↑Wed Sep 12, 2018 7:57 pmThat is really fantastic. The UHMW guard with the white witch hats is epic
- ThePearDream
- PAT. # 2.972.923
- Posts: 2072
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
Re: ThePearDream's Talman Projects
Thanks guys.
Awww yeaaaah, blasting that glitter
Awww yeaaaah, blasting that glitter
Doug
@dpcannafax
@dpcannafax
- ThePearDream
- PAT. # 2.972.923
- Posts: 2072
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
Re: ThePearDream's Talman Projects
It's a beautiful day for spraying clearcoat. Mid 80s and 18% humidity. This Krylon clear is going on very nicely. I have 4 or 5 coats down so far, with one of four cans used. Sparkly finishes are hard to photograph, but it's mesmerizing to see it in the sun.
Doug
@dpcannafax
@dpcannafax
- ThePearDream
- PAT. # 2.972.923
- Posts: 2072
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
Re: ThePearDream's Talman Projects
So, I got all of the electronic bits soldered up and plugged in to test everything out. I couldn't get sound from the neck coils in any position and the bridge coils only worked in two positions. I broke out my multimeter to track down the issue. The pots and jack are wired right and I have the pickup leads right. It seems to be an issue with the switch. The pad for the neck series link is connected to ground in every switch position. The neck lead connects to ground in the neck position as well. No wonder there is no sound from the neck. Bridge series link also grounds in positions that it shouldn't.
It looks like I can take the switch apart. Maybe there will be an obvious problem, but I doubt it. Time to start researching alternatives. I definitely don't have room for a big super switch, but may be able to fit the narrow super switch that Toneshapers sells. If nothing else, I can always use a normal 3 way lever switch.
It looks like I can take the switch apart. Maybe there will be an obvious problem, but I doubt it. Time to start researching alternatives. I definitely don't have room for a big super switch, but may be able to fit the narrow super switch that Toneshapers sells. If nothing else, I can always use a normal 3 way lever switch.
Doug
@dpcannafax
@dpcannafax
- Shadoweclipse13
- PAT. # 2.972.923
- Posts: 12435
- Joined: Fri Feb 07, 2014 9:22 pm
- Location: Stuck in the dimension of imagination
Re: ThePearDream's Talman Projects
OHMW guard with that purple sparkle is gonna be absolutely tits
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
- ThePearDream
- PAT. # 2.972.923
- Posts: 2072
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
Re: ThePearDream's Talman Projects
Thanks man. The more clear I put on, the more awesome it gets. I may have to do a gif or short video to capture it in all it's glory.
This morning I took the switch apart and figured out the problem almost immediately. The mini circuit board told me that it was an EYB switch, not a Schaller. And apparently, the EYB uses completely different pad assignments. I had ordered Schaller megaswitches years ago from the same vendor and just assumed they were the same still. I was totally at fault here. Of course, while taking the switch apart, the contacts that follow the lever came flying out, since they are spring loaded . I found two contacts, but I'm not sure if there are one or two more that are missing, or if I have them all . Well, I had a $20 ebay voucher, so I went on there and found an actual Schaller switch for $20.20.
This morning I took the switch apart and figured out the problem almost immediately. The mini circuit board told me that it was an EYB switch, not a Schaller. And apparently, the EYB uses completely different pad assignments. I had ordered Schaller megaswitches years ago from the same vendor and just assumed they were the same still. I was totally at fault here. Of course, while taking the switch apart, the contacts that follow the lever came flying out, since they are spring loaded . I found two contacts, but I'm not sure if there are one or two more that are missing, or if I have them all . Well, I had a $20 ebay voucher, so I went on there and found an actual Schaller switch for $20.20.
Doug
@dpcannafax
@dpcannafax
- Rgand
- PAT. # 2.972.923
- Posts: 1171
- Joined: Sun Mar 05, 2017 3:55 pm
Re: ThePearDream's Talman Projects
Doncha love it when things just pop apart for you when you aren't expecting it? Good that you have a Schaller on the way.
- ThePearDream
- PAT. # 2.972.923
- Posts: 2072
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
Re: ThePearDream's Talman Projects
I'll probably never learn to expect it. At least I've learned to start doing wiring ahead of time. Having these things happen during assembly is just the worst.
Still needs level sanding & buffing & the finish on the sides/back, but I couldn't help sharing this sneak peak.
Doug
@dpcannafax
@dpcannafax
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
- Rgand
- PAT. # 2.972.923
- Posts: 1171
- Joined: Sun Mar 05, 2017 3:55 pm
Re: ThePearDream's Talman Projects
That's frikkin' cool!
The UHMW pickguard is outstanding.
The UHMW pickguard is outstanding.