OffsetGuitars.com

Rosser guitars made me an ash Les Paul sort of body. I asked him to add contours, make it set up for a Fender hardtail bridge and a 51 P Bass control plate. I picked up a Starcaster neck pretty cheap that had nice tuners and a good aged amber color and painted the headstock so far. Here is what I have so far.

20190722_134241 by Christopher Louck, on Flickr

20190722_134308 by Christopher Louck, on Flickr

20190722_134333 by Christopher Louck, on Flickr




So then I did this.

20190722_163311 by Christopher Louck, on Flickr

20190722_163303_HDR by Christopher Louck, on Flickr

Pretty pleased with it so far.

Is that black dye? I love that you can clearly see the grain!

Black spray paint. I did grey primer first. Since I didn't fill the grain you can see it really well. I thought the grain was really nice and would just let it show.

I got the tape off the neck/headstock. I will clean up the edge with some fine sandpaper tomorrow and let it cure for a week before I start putting clear on. I need to work on a decal still.

2019-07-22_09-19-12 by Christopher Louck, on Flickr

Midnight by Christopher Louck, on Flickr

Love it! I really like your white overspray too

Thanks! First time trying it. I always try to avoid paint run so doing on purpose was a new experience. LOL

The control cavity was too small to fit the control plate guts so I used my drill and router to open it a bit. I also test fit the pickups and rings. Seems like those will be fine.

20190813_110503 by Christopher Louck, on Flickr

20190813_115024 by Christopher Louck, on Flickr

You're a madman

You could fill the grain in a contrasting color and make it really pop.

This mongrel has a millk moustache..

For sure. Or it has rabies. LOL

I lightly sprayed my pickup rings with white. I think it should work well with the body.

20190818_102057 by Christopher Louck, on Flickr

Almost done here. Missing ferrules and I need to wire it up still, but it is looking great!

20190819_185158 by Christopher Louck, on Flickr

I sprayed some satin deft over my minwax poly on the headstock and it had a weird reaction. It crackled up. Works for this project and is a cool texture, but really strange. Never had that happen before.

20190825_093343 by Hentai No Baka, on Flickr