It’s been too long...here’s a rig update! Share your rig too!

For guitars of the straight waisted variety (or reverse offset).
User avatar
Zork
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1811
Joined: Thu Jan 19, 2012 7:01 am
Location: Bremen, Germany

Re: It’s been too long...here’s a rig update! Share your rig too!

Post by Zork » Sat Aug 11, 2018 1:45 pm

I don't know how to rotate pics on tinypic but here's my rig.

These are my basses: Squier CV Jazz and defretted Harly Benton Precision:

Image

Both are strung with La Bella flats. The Jazz has both pickups wired in series and has only volume and tone controls.

This is my amp in all its glory:

Image

The cabinet is custom made by bavarian manufacturer FMC and has 2x15" and 2x8" speakers.

Here's my pedalboard in it's current state:

Image

The colorful box in the middle is a bypass looper to select either the right half with individual effects or the left side wich is only the M9. It can bypass both sides, too.

I also have another pedalboard:

Image

The Jamman and expressionpedal as well as the DI is part of my synth setup which you can see here:

Image

And finally I took a picture of the guitar I'm using occasionally for recordings, but never on stage:

Image

If you wonder what I'm doing with this setup you are more than welcome to check my band on youtube:
https://www.youtube.com/channel/UCryHdX ... DkrwPEYS-g
:-)

User avatar
TeenageShutdown!
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 449
Joined: Sun Dec 14, 2014 10:06 am

Re: It’s been too long...here’s a rig update! Share your rig too!

Post by TeenageShutdown! » Sun Aug 12, 2018 4:35 am

^beautiful Esquire!

Post Reply