Body is 2050g, neck 500g. No idea what these usually weigh
What's on your workbench right now?
- krib
- PAT. # 2.972.923
- Posts: 51
- Joined: Sun Jan 02, 2011 1:55 am
- Location: Finland
- Rgand
- PAT. # 2.972.923
- Posts: 1171
- Joined: Sun Mar 05, 2017 3:55 pm
Re: What's on your workbench right now?
Thanks, I was curious. It looks like a solid alder body would come in around 3.5-4lbs which means 1590-1825g. I'd say for walnut, you are doing good. Looks terriffic, too.
- Insomnicide
- PAT. # 2.972.923
- Posts: 59
- Joined: Fri May 19, 2017 5:20 pm
Re: What's on your workbench right now?
IT'S ALIVE!
IMG20190817163035 by Rosie Brennan, on Flickr
IMG_20190817_164952_332 by Rosie Brennan, on Flickr
VID_39480331_080020_105 by Rosie Brennan, on Flickr
IMG20190817163035 by Rosie Brennan, on Flickr
IMG_20190817_164952_332 by Rosie Brennan, on Flickr
VID_39480331_080020_105 by Rosie Brennan, on Flickr
- MattK
- PAT. # 2.972.923
- Posts: 3623
- Joined: Sun Aug 10, 2008 9:51 pm
- Location: Hobart, Australia
Re: What's on your workbench right now?
Looks KILLER Rosie!
- Rgand
- PAT. # 2.972.923
- Posts: 1171
- Joined: Sun Mar 05, 2017 3:55 pm
Re: What's on your workbench right now?
From the look of things, it's very much alive. Congrats, looks great.
- marqueemoon
- PAT. # 2.972.923
- Posts: 7401
- Joined: Mon Jun 20, 2016 9:37 pm
- Location: Seattle
Re: What's on your workbench right now?
That bass is amazing. Well done.
- JakeNelson2002
- PAT. # 2.972.923
- Posts: 81
- Joined: Mon Feb 19, 2018 2:48 pm
Re: What's on your workbench right now?
The next non reverse just hit the bench today. Free pine counter cutoff.
- Steadyriot.
- PAT. # 2.972.923
- Posts: 1273
- Joined: Wed Mar 09, 2011 2:16 pm
- Location: The Netherlands
Re: What's on your workbench right now?
Oof that's rough!
You better watch out with that knot on the lower bout.
Are you going to fill them? Maybe some black epoxy?
On my workbench was my new bicycle crate:
Routed out the bottom and stained it black with india ink.
You better watch out with that knot on the lower bout.
Are you going to fill them? Maybe some black epoxy?
On my workbench was my new bicycle crate:
Routed out the bottom and stained it black with india ink.
"If someone duetted with a Bald Eagle, they could rule the Country charts from here to eternity." ~shadowplay
- JakeNelson2002
- PAT. # 2.972.923
- Posts: 81
- Joined: Mon Feb 19, 2018 2:48 pm
Re: What's on your workbench right now?
yeah i’ll move my outline some before i cut it. it has some black epoxy on it already and once i get it cut and thinned to size i think i’ll do some more. i am planning on chambering so i think i will put in some pieces across the grain to stabilize it some as there are some good size cracks in it. home depot ‘mahogany’ topSteadyriot. wrote: ↑Tue Aug 20, 2019 2:05 pmOof that's rough!
You better watch out with that knot on the lower bout.
Are you going to fill them? Maybe some black epoxy?
- nelsongeets
- PAT. # 2.972.923
- Posts: 58
- Joined: Tue May 31, 2016 4:00 am
- Contact:
- JakeNelson2002
- PAT. # 2.972.923
- Posts: 81
- Joined: Mon Feb 19, 2018 2:48 pm
Re: What's on your workbench right now?
I dig it! What pickups are those?nelsongeets wrote: ↑Thu Aug 29, 2019 9:42 amIt's been a while! Here's what's next up on my set up bench. Almost all dialed in. Just need to finish the nut and get some pickup springs in there to bring the PUs closer to the strings where they need to be.
- nelsongeets
- PAT. # 2.972.923
- Posts: 58
- Joined: Tue May 31, 2016 4:00 am
- Contact:
Re: What's on your workbench right now?
Thanks! Those are Guyatone spec Gold foil pickups under p90 size covers. Wound for me by Gemini Pickups. Rob at Gemini is doing some great stuff!JakeNelson2002 wrote: ↑Thu Aug 29, 2019 10:00 amI dig it! What pickups are those?nelsongeets wrote: ↑Thu Aug 29, 2019 9:42 amIt's been a while! Here's what's next up on my set up bench. Almost all dialed in. Just need to finish the nut and get some pickup springs in there to bring the PUs closer to the strings where they need to be.
- Rgand
- PAT. # 2.972.923
- Posts: 1171
- Joined: Sun Mar 05, 2017 3:55 pm
Re: What's on your workbench right now?
Red tort and LPB. Very nice!
- CROSS_guitars
- PAT. # 2.972.923
- Posts: 3134
- Joined: Tue Sep 09, 2008 5:52 am
- Location: Thornbury Melbourne
Re: What's on your workbench right now?
I'm in to this. Nice design!nelsongeets wrote: ↑Thu Aug 29, 2019 9:42 amIt's been a while! Here's what's next up on my set up bench. Almost all dialed in. Just need to finish the nut and get some pickup springs in there to bring the PUs closer to the strings where they need to be.
- epizootics
- PAT. # 2.972.923
- Posts: 719
- Joined: Wed Jun 28, 2017 10:29 pm
- Location: Lyon, France
Re: What's on your workbench right now?
I like the whole thing, but that headstock looks particularly nice!nelsongeets wrote: ↑Thu Aug 29, 2019 9:42 amIt's been a while! Here's what's next up on my set up bench. Almost all dialed in. Just need to finish the nut and get some pickup springs in there to bring the PUs closer to the strings where they need to be.