I Would Like to Play a (Give-Away) Game (Poll is Open)
Posted: Sun Feb 10, 2019 12:50 pm
Update: The poll is open!
Here are your top 4 to vote for:
1- PixMix: Novaks, gold-guard, and brown-stained back (Post 12)
2- Joeld: Neck pickup only, blue/green clear-guard, and walnut stained back (Post 15)
3- Tammyw: Playing with pearlescent additives, custom-guards, neodymium pickups, and birdseye/ebony neck (Post 24)
4- Kimson: An essay in one's internal struggle to decide on electronics choices (Post 29)
Original post:
Awhile back I did a test run on my CNC to see how this double-dye stabilized burl stuff I've been making machines. I used it as a test run to try out the Jazzmaster files I had created, as well. The pictures below are the result. However, since I don't build clones this truly was exactly that: a set of tests.
Therefore, since I have no use for it, I'm going to play a game!
Rules:
1- Anyone that is willing to pay for the actual shipping costs of the body if they win is welcome to play
2- You must have the abilities and desire to complete the project
3- You must post the full specs of what you intend to complete the build as
4- You have til March 17th to enter
5- After March 17th I will select some of my favorites, start a poll, and the forum will vote for the winner
Current specs of body:
* Poplar body wood
* Double-dye stabilized blue/green maple burl top with black epoxy void-fills
* Standard JM thickness, routing, etc.
* Screw holes for trem are too large and will need to be filled and re-drilled
* Needs sanding
* Pickguard used to map out placements of parts was, I believe, https://www.ebay.com/itm/NEW-Parchment- ... :rk:9:pf:0
Let the games begin!
Chris
Here are your top 4 to vote for:
1- PixMix: Novaks, gold-guard, and brown-stained back (Post 12)
2- Joeld: Neck pickup only, blue/green clear-guard, and walnut stained back (Post 15)
3- Tammyw: Playing with pearlescent additives, custom-guards, neodymium pickups, and birdseye/ebony neck (Post 24)
4- Kimson: An essay in one's internal struggle to decide on electronics choices (Post 29)
Original post:
Awhile back I did a test run on my CNC to see how this double-dye stabilized burl stuff I've been making machines. I used it as a test run to try out the Jazzmaster files I had created, as well. The pictures below are the result. However, since I don't build clones this truly was exactly that: a set of tests.
Therefore, since I have no use for it, I'm going to play a game!
Rules:
1- Anyone that is willing to pay for the actual shipping costs of the body if they win is welcome to play
2- You must have the abilities and desire to complete the project
3- You must post the full specs of what you intend to complete the build as
4- You have til March 17th to enter
5- After March 17th I will select some of my favorites, start a poll, and the forum will vote for the winner
Current specs of body:
* Poplar body wood
* Double-dye stabilized blue/green maple burl top with black epoxy void-fills
* Standard JM thickness, routing, etc.
* Screw holes for trem are too large and will need to be filled and re-drilled
* Needs sanding
* Pickguard used to map out placements of parts was, I believe, https://www.ebay.com/itm/NEW-Parchment- ... :rk:9:pf:0
Let the games begin!
Chris