Series wiring with no 3 way switch?
- nateispro
- PAT. # 2.972.923
- Posts: 141
- Joined: Sat Mar 10, 2012 2:33 pm
- Location: Utah
Series wiring with no 3 way switch?
Hey guys, I was wondering is it possible to wire up a set of JM pickups to a just a slider switch and the standard volume and tone control so its either both pickups in series or both parallel? I dont really switch between neck or bridge and would like simplified wiring. Thanks guys!
- nateispro
- PAT. # 2.972.923
- Posts: 141
- Joined: Sat Mar 10, 2012 2:33 pm
- Location: Utah
Re: Series wiring with no 3 way switch?
I was looking at my wiring diagram, it shows the lead from the slider switch and the bridge pickup lead both going to the 3 way switch. Can i just omit the switch and tie these leads to the input of the volume pot?
- Shadoweclipse13
- PAT. # 2.972.923
- Posts: 12446
- Joined: Fri Feb 07, 2014 9:22 pm
- Location: Stuck in the dimension of imagination
Re: Series wiring with no 3 way switch?
Yes you can. Just wire the pickups directly to the series-parallel switch, and the output of that goes to your volume and tone. Very simple! Let me know if you have any troubles.
Jason
Jason
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384