Major help needed with mustang wiring!!!
- Vscrl1
- PAT PEND
- Posts: 6
- Joined: Mon Jan 02, 2012 8:25 am
Major help needed with mustang wiring!!!
So I bought one of the new Squier bullet mustangs and put a mustang pickguard on it and bought a dimarzio air norton s and a dimarzio tone zone s for it. I can't for the life of me figure out how to wire it. I installed the mustang switches (no clue if they are on/off/on or on/on/on). Id like to have each pickup wired for humbucker/off/coil tap. Can someone please help me? Thanks in advance.
- Vscrl1
- PAT PEND
- Posts: 6
- Joined: Mon Jan 02, 2012 8:25 am
Re: Major help needed with mustang wiring!!!
Ok so I got the wiring figured out, but now I have a ground issue when both pickups are switched off. Any ideas?
- Shadoweclipse13
- PAT. # 2.972.923
- Posts: 12446
- Joined: Fri Feb 07, 2014 9:22 pm
- Location: Stuck in the dimension of imagination
Re: Major help needed with mustang wiring!!!
As in, buzzing badly, or no signal at all?
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
- Vscrl1
- PAT PEND
- Posts: 6
- Joined: Mon Jan 02, 2012 8:25 am
Re: Major help needed with mustang wiring!!!
It's weird. When I'm on the clean channel on my amp, you can hear the strings slightly but with a slight buzz, on the gain channel, you can hear the strings pretty well and the buzz is more noticeable. This is with both pickups switched off. I'll try and post some pics of the wiring. It's not the prettiest just to forewarn lol
- palesnow67
- PAT. # 2.972.923
- Posts: 109
- Joined: Sun Jun 11, 2017 8:07 pm
Re: Major help needed with mustang wiring!!!
did you wire the ground correctly onto the pot? is the jack input wires backwards when soldered?
10. Signatures must be no more than two lines.