Page 1 of 1
Allen Key Size - Help
Posted: Mon Nov 06, 2006 11:13 am
by Ian
Hey there,
I lost the allen key for the saddle adjustment screws on my Jazzmaster. I need to get a new one, emergency-wise, on the way home from work. What size do I need to get?
Thanks!
Re: Allen Key Size - Help
Posted: Mon Nov 06, 2006 11:47 am
by fullerplast
AVRI and vintage are .050... it's sometimes tough to find. I had to buy a whole set to get one.
MIJ/CIJ are a little bigger (metric). I forget the actual size (in mm).
You definitely can't use one for the other.
Re: Allen Key Size - Help
Posted: Mon Nov 06, 2006 11:51 am
by Ian
I have an AVRI - I probably should have mentioned that. Duh.
Thanks for the help - I'll be trying to find a .050 on the way home I guess.
Re: Allen Key Size - Help
Posted: Mon Nov 06, 2006 11:55 am
by fullerplast
You're welcome... good luck!
Re: Allen Key Size - Help
Posted: Mon Nov 06, 2006 12:24 pm
by Ian
Didn't have any that small at the local hardware store. Oh oh... this might be harder than I anticipated!
Re: Allen Key Size - Help
Posted: Mon Nov 06, 2006 1:18 pm
by fullerplast
Didja check the sets?
Mine is an 11 pc. set in a little red holder with 'Eklind' printed on it... from ACE hardware if I remember correctly.
I think Fender sells them separately, though. A lot cheaper if a dealer near you has one.
Re: Allen Key Size - Help
Posted: Mon Nov 06, 2006 1:22 pm
by Ian
Yeah - the smallest one in any set they had was a 1.5. I'll try my local guitar shop on the way home too.
Re: Allen Key Size - Help
Posted: Mon Nov 06, 2006 4:01 pm
by Ian
They had one! Yay! Problem solved. Thanks for the help.
Re: Allen Key Size - Help
Posted: Mon Nov 06, 2006 5:35 pm
by fullerplast
Cool, glad it worked out for ya!