New EU offset bridge / trem maker
- timtam
- PAT. # 2.972.923
- Posts: 2749
- Joined: Sun Oct 22, 2017 2:42 am
- Location: Melbourne
New EU offset bridge / trem maker
There is a new bridge / trem from Halon out of the EU ...
https://www.facebook.com/halonguitarpar ... 6142198231
EDIT: replaced dead image link
https://www.halonguitarparts.com/produc ... ridge-set/
Also has vintage-style saddle replacements ...
https://www.facebook.com/halonguitarpar ... 3556859156
https://www.facebook.com/halonguitarpar ... 6142198231
EDIT: replaced dead image link
https://www.halonguitarparts.com/produc ... ridge-set/
Also has vintage-style saddle replacements ...
https://www.facebook.com/halonguitarpar ... 3556859156
Last edited by timtam on Wed Jan 23, 2019 8:40 pm, edited 1 time in total.
"I just knew I wanted to make a sound that was the complete opposite of a Les Paul, and that’s pretty much a Jaguar." Rowland S. Howard.
- northernlights
- PAT. # 2.972.923
- Posts: 61
- Joined: Sat Dec 30, 2017 1:42 am
Re: New EU offset bridge / trem maker
Nice but really expensive nevertheless i'd like to try it
- rexter
- PAT. # 2.972.923
- Posts: 1689
- Joined: Tue Sep 22, 2009 3:44 am
- Location: Norwich, East of England
Re: New EU offset bridge / trem maker
Saw this somewhere, maybe instagram. Looks cool, but brutally expensive yes. Don't doubt the effort that's gone into it and that bridge base looks super chunky like it would sustain really well, but the saddles ... still looking just like 3 intonated tele saddles to me. Wonder if there is a huge advantage in going for this over retro fitting some Rutters steel saddles to a JM bridge bass?
Edit;;;; just seen the thing about the 6 saddle sets that are available. That's good. Personally I think there'd be a lot of mileage in somebody manufacturing 9.5" radius saddle sets with proper spacing that just be fitted to a regular bridge base as an upgrade.
Wouldn't be keen on those height adjustment screws poking out - that's an age old problem that nobody likes!
Edit;;;; just seen the thing about the 6 saddle sets that are available. That's good. Personally I think there'd be a lot of mileage in somebody manufacturing 9.5" radius saddle sets with proper spacing that just be fitted to a regular bridge base as an upgrade.
Wouldn't be keen on those height adjustment screws poking out - that's an age old problem that nobody likes!
Last edited by rexter on Fri Jan 04, 2019 3:54 am, edited 2 times in total.
- Embenny
- PAT. # 2.972.923
- Posts: 10363
- Joined: Tue May 24, 2016 5:07 am
Re: New EU offset bridge / trem maker
Wow, crazy expensive. Basically a rocking Mastery (3-saddle, nicely machined) bridge.
I hope the absence of Staytrem from the NA market inspires more people to create competing products. This is great to see.
I hope the absence of Staytrem from the NA market inspires more people to create competing products. This is great to see.
The artist formerly known as mbene085.
- secondhand
- PAT. # 2.972.923
- Posts: 114
- Joined: Mon Jun 30, 2014 7:31 am
- Location: Des Moines, Iowa
Re: New EU offset bridge / trem maker
My first big purchase of guitar specific tools was from this guy on Ebay as G.M.I. Even with shipping from Greece it was waaay cheaper than Stew Mac.
Quality stuff for sure. With that said, not sure I am interested in the bridge. I see no point in going to 3 saddles and a few sharp corners turn me off.
My personal favorite feature of the Staytrem was the offset intonation screws. I spent more time trimming down stock bridge screws than I care to remember. Anyone with me on that? I don't see this bridge as bringing anything new or useful to the game.
I don't find mention of price on the website or Facebook. What is he asking for the bridge and trem?
Quality stuff for sure. With that said, not sure I am interested in the bridge. I see no point in going to 3 saddles and a few sharp corners turn me off.
My personal favorite feature of the Staytrem was the offset intonation screws. I spent more time trimming down stock bridge screws than I care to remember. Anyone with me on that? I don't see this bridge as bringing anything new or useful to the game.
I don't find mention of price on the website or Facebook. What is he asking for the bridge and trem?
Good as the best. Bad as the worst!
- marqueemoon
- PAT. # 2.972.923
- Posts: 7411
- Joined: Mon Jun 20, 2016 9:37 pm
- Location: Seattle
Re: New EU offset bridge / trem maker
I like that there are so many options, but yeah. Really expensive.
A brass bridge with titanium saddles would be the hotness on my new project, but not for that price.
A brass bridge with titanium saddles would be the hotness on my new project, but not for that price.
- Larry Mal
- PAT. # 2.972.923
- Posts: 19739
- Joined: Mon Nov 29, 2010 4:25 pm
- Location: Saint Louis, MO
Re: New EU offset bridge / trem maker
Looks good, I'm happy to see the development of a great looking new bridge. I would want it to be non-rocking, though, I don't care for rocking bridges at all. Also, if I'm going to quibble, I'd rather have Mustang style fixed radius saddles since my belief is the less moving parts the better when it comes to bridges and saddles.
It's not a serious qualm, though, and I'd consider this bridge I suppose. I'd rather have the Telecaster type saddles personally.
I also took a look at the Les Paul bridges, those seem OK. Certainly better than what Gibson makes but not, in my opinion, better than what it out there from Faber and Callaham already. Again, though, something that would certainly be up for consideration.
Despite all my usual complaining I'm ecstatic to see another serious contender in the world of offset guitar bridges, since StayTrem bowed out basically and it's become depressingly clear that Fender will never make a decent bridge.
It's not a serious qualm, though, and I'd consider this bridge I suppose. I'd rather have the Telecaster type saddles personally.
I also took a look at the Les Paul bridges, those seem OK. Certainly better than what Gibson makes but not, in my opinion, better than what it out there from Faber and Callaham already. Again, though, something that would certainly be up for consideration.
Despite all my usual complaining I'm ecstatic to see another serious contender in the world of offset guitar bridges, since StayTrem bowed out basically and it's become depressingly clear that Fender will never make a decent bridge.
Back in those days, everyone knew that if you were talking about Destiny's Child, you were talking about Beyonce, LaTavia, LeToya, and Larry.
- Larry Mal
- PAT. # 2.972.923
- Posts: 19739
- Joined: Mon Nov 29, 2010 4:25 pm
- Location: Saint Louis, MO
Re: New EU offset bridge / trem maker
And the Telecaster bridges look like serious contenders also, might be a great product for European folk who would probably have to pay more for Callaham stuff, which looks like the inspiration for this (and even uses some of the same talking points cribbed almost directly from the Callaham site).
Also, I just took a look at the offset tremolo units... they look sharp, don't they?
Overall they seem like a high quality company with well thought out products that I'd be happy to support if there was a product that I felt was the best for my needs.
Expensive, sure, but if your guitar is a keeper, something that you would use as a creative tool for the rest of your life, what is money at that point?
Also, I just took a look at the offset tremolo units... they look sharp, don't they?
Overall they seem like a high quality company with well thought out products that I'd be happy to support if there was a product that I felt was the best for my needs.
Expensive, sure, but if your guitar is a keeper, something that you would use as a creative tool for the rest of your life, what is money at that point?
Back in those days, everyone knew that if you were talking about Destiny's Child, you were talking about Beyonce, LaTavia, LeToya, and Larry.
- Debaser
- PAT. # 2.972.923
- Posts: 417
- Joined: Mon Apr 21, 2014 2:12 pm
- Location: Phoenix AZ
Re: New EU offset bridge / trem maker
It looks well done, I’d look into it if I couldn’t already fabricate my own. My gripe is the saddle screws are sticking up so high, but maybe that’s because it’s uninstalled. Only so much set screw travel length is allowable in the JM/Jag bridge U-channel. Keeping the intonation screws straight parallel with the base is not possible with most Tele saddles. Raising the saddles up to clear the base walls puts enough angle that it actually ‘locks’ the saddle and keeps it from moving around with vibrato use. Not too much angle though, as it will lock up and intonation adjustments are difficult. The benefits of this design are the different saddle materials available and the two string per saddle, which will help like the 3 string per saddle design used in the Mastery.
I made this verion with my spare Gotoh titanium saddles, which are compensated. Unfortunately, it won’t work, as deeper string channels are needed to handle 10s. I want to try the Philadelphia Luthier compensated saddles in aluminum. If they work I’ll be ditching my second Staytrem, I won’t get hosed this time
I made this verion with my spare Gotoh titanium saddles, which are compensated. Unfortunately, it won’t work, as deeper string channels are needed to handle 10s. I want to try the Philadelphia Luthier compensated saddles in aluminum. If they work I’ll be ditching my second Staytrem, I won’t get hosed this time
50,000 watts out of Mexico, this is the BorderRadio...
- timtam
- PAT. # 2.972.923
- Posts: 2749
- Joined: Sun Oct 22, 2017 2:42 am
- Location: Melbourne
Re: New EU offset bridge / trem maker
194 to 275 euros for the bridge, depending on chosen material (although I don't think their website is working for orders yet) ...secondhand wrote: ↑Sat Jan 05, 2019 9:06 amI don't find mention of price on the website or Facebook. What is he asking for the bridge and trem?
https://www.halonguitarparts.com/produc ... ridge-set/
"I just knew I wanted to make a sound that was the complete opposite of a Les Paul, and that’s pretty much a Jaguar." Rowland S. Howard.
- northernlights
- PAT. # 2.972.923
- Posts: 61
- Joined: Sat Dec 30, 2017 1:42 am
Re: New EU offset bridge / trem maker
I ordered it. The owner is very nice guy. I will compare it with mastery units. I got high expectation indeed. I'll get 1060 steel base plate and brass saddles and vibrato. String space is 55.5 which will be interesting for me i am used to play 52.5
- PJazzmaster
- PAT. # 2.972.923
- Posts: 5160
- Joined: Tue Mar 10, 2009 6:59 am
- Location: Bo Diddley Technical Institute of Cryptozoology (European HQ)
Re: New EU offset bridge / trem maker
100% with you on thatsecondhand wrote: ↑Sat Jan 05, 2019 9:06 amMy personal favorite feature of the Staytrem was the offset intonation screws. I spent more time trimming down stock bridge screws than I care to remember. Anyone with me on that?
- PJazzmaster
- PAT. # 2.972.923
- Posts: 5160
- Joined: Tue Mar 10, 2009 6:59 am
- Location: Bo Diddley Technical Institute of Cryptozoology (European HQ)
Re: New EU offset bridge / trem maker
oh, please report back !!!northernlights wrote: ↑Thu Jan 10, 2019 7:27 amI ordered it. The owner is very nice guy. I will compare it with mastery units. I got high expectation indeed. I'll get 1060 steel base plate and brass saddles and vibrato. String space is 55.5 which will be interesting for me i am used to play 52.5
- kimson
- PAT. # 2.972.923
- Posts: 281
- Joined: Thu Jul 27, 2017 6:53 pm
- Location: Finland
Re: New EU offset bridge / trem maker
Interesting stuff for sure, waiting eagerly for user experiences.
BTW, based on the post linked below, the bridge appears to be non-rocking (or maybe they do both, who knows):
https://m.facebook.com/halonguitarparts ... 482961930/
The price of their stainless steel bridge is about the same as a Mastery bridge in Europe so I guess it's not "that bad"...
Anyone care to share how much is the trem unit going for and what might their trem "innovations" be?
Here's a direct link to the unit; I can't say I'm too crazy about the logo, though:
https://m.facebook.com/halonguitarparts ... 378865874/
BTW, based on the post linked below, the bridge appears to be non-rocking (or maybe they do both, who knows):
https://m.facebook.com/halonguitarparts ... 482961930/
The price of their stainless steel bridge is about the same as a Mastery bridge in Europe so I guess it's not "that bad"...
Anyone care to share how much is the trem unit going for and what might their trem "innovations" be?
Here's a direct link to the unit; I can't say I'm too crazy about the logo, though:
https://m.facebook.com/halonguitarparts ... 378865874/
- jellodog
- PAT. # 2.972.923
- Posts: 88
- Joined: Fri Aug 21, 2015 12:55 pm
- Location: Ottawa