Left hand trem arm for Jazzmaster

For help with setups and other technical issues.
Post Reply
User avatar
Anon.Dando
PAT PEND
PAT PEND
Posts: 14
Joined: Mon Jun 18, 2018 9:09 pm

Left hand trem arm for Jazzmaster

Post by Anon.Dando » Sun Jul 15, 2018 11:37 pm

Hi all,

I’m looking for a left handed trem arm to fit an American Jazzmaster trem assembly (part number 0054466049).

Fender said they do not sell them individually and I’m not really sure if the knockoffs on eBay will fit... there are a few fender ones on eBay that become very expensive by the time I get them here to Australia.

Can anyone offer me any advice here?

I would really appreciate the help.

Thanks.

User avatar
Acoasma
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 61
Joined: Sun Feb 05, 2017 8:03 am
Location: Prague

Re: Left hand trem arm for Jazzmaster

Post by Acoasma » Mon Jul 16, 2018 12:56 am

Get staytrem.

User avatar
JVG
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1401
Joined: Thu Aug 06, 2015 9:54 pm
Location: Sydney, Straya

Re: Left hand trem arm for Jazzmaster

Post by JVG » Thu Jul 19, 2018 7:03 am

Yep, the Staytrem arm/collet is the way to go (unless you're on a tight budget.)

Cheers!
J.

armyofbees
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 122
Joined: Thu Feb 19, 2015 8:16 pm

Re: Left hand trem arm for Jazzmaster

Post by armyofbees » Thu Jul 19, 2018 1:31 pm

guitar parts resouce sells them for about $26 US (no plastic tip though but that's easy enough to find).
http://www.guitarpartsresource.com/guit ... emarms.htm

User avatar
Anon.Dando
PAT PEND
PAT PEND
Posts: 14
Joined: Mon Jun 18, 2018 9:09 pm

Re: Left hand trem arm for Jazzmaster

Post by Anon.Dando » Sun Jul 22, 2018 4:45 am

Thanks for the responses. I looked into it and ended up going with the stay trem. It seems like a good bit of gear. I’m looking forward to trying it out!
Cheers everyone.

Post Reply