Hi all,
Please excuse the very beginnerish question:
I’m looking to strip down my Avri 65 JM and do an Elvis Costello Walnut wood stain (more questions to follow on that!). What’s the best way to disconnect the wires from the body underneath the guard?
Many thanks
Removal of wiring
-
- PAT. # 2.972.923
- Posts: 2831
- Joined: Tue Oct 21, 2014 4:12 am
- Location: U.S. of fuckin' A.
Re: Removal of wiring
screwdriver, soldering ironBrash83 wrote: ↑Wed Aug 15, 2018 11:59 amHi all,
Please excuse the very beginnerish question:
I’m looking to strip down my Avri 65 JM and do an Elvis Costello Walnut wood stain (more questions to follow on that!). What’s the best way to disconnect the wires from the body underneath the guard?
Many thanks
- Brash83
- PAT PEND
- Posts: 6
- Joined: Mon Apr 11, 2016 8:07 am
Re: Removal of wiring
Thanks. Any way to do it carefully if you don’t own a soldering iron?
- timtam
- PAT. # 2.972.923
- Posts: 2739
- Joined: Sun Oct 22, 2017 2:42 am
- Location: Melbourne
Re: Removal of wiring
There's not really anything to unsolder AFAIK ...
https://reverb.com/au/item/873280-fende ... aster-body
Except maybe the glazier points holding the brass cavity shielding in place ...
https://www.fmicassets.com/Damroot/Orig ... A_SISD.pdf
Or maybe they can just be eased out without unsoldering ?
https://reverb.com/au/item/873280-fende ... aster-body
Except maybe the glazier points holding the brass cavity shielding in place ...
https://www.fmicassets.com/Damroot/Orig ... A_SISD.pdf
Or maybe they can just be eased out without unsoldering ?
"I just knew I wanted to make a sound that was the complete opposite of a Les Paul, and that’s pretty much a Jaguar." Rowland S. Howard.
- Brash83
- PAT PEND
- Posts: 6
- Joined: Mon Apr 11, 2016 8:07 am
Re: Removal of wiring
Thanks for that- appreciate it! Will update how it goes!