Page 1 of 1
Post'em Up Offsets with Aluminum Necks
Posted: Wed Feb 05, 2020 3:53 pm
by AlumNeck
Offset are just the best bodies for Aluminum necks.
The Red on his a Carved Top JM with Alef neck. The Green one is an Electravox Guitar Labs JM with Robot Graves Neck and the Burst mashup has an EGC neck.,
Re: Post'em Up Offsets with Aluminum Necks
Posted: Wed Feb 05, 2020 7:41 pm
by loveinathens
How would you compare the RGI to the Aluminati? I'm still on the fence since I keep getting sidetracked financially. The Robot Graves stuff appeals to me aesthetically (really hung up on the TB/EGC look), but I do think the Aluminati specs seem better on paper. Was thinking of getting an EGC at first but I've heard bad things from a bunch of touring bands about the consistency of their service.
Re: Post'em Up Offsets with Aluminum Necks
Posted: Wed Feb 05, 2020 7:54 pm
by AlumNeck
loveinathens wrote: ↑Wed Feb 05, 2020 7:41 pm
How would you compare the RGI to the Aluminati? I'm still on the fence since I keep getting sidetracked financially. The Robot Graves stuff appeals to me aesthetically (really hung up on the TB/EGC look), but I do think the Aluminati specs seem better on paper. Was thinking of getting an EGC at first but I've heard bad things from a bunch of touring bands about the consistency of their service.
These all feel different and these are all solid aluminum. I think they are all really well made can't go wrong there, seriously they are all high end pieces. I like the feel of the Alef the best it's soft D/C shape. The Aluminati not pictured here is hollow and has a fretboard and they do feel more normal and is much lighter about the same as a wood neck, they are my favorite though I really like the solid necks as well.
Re: Post'em Up Offsets with Aluminum Necks
Posted: Thu Feb 06, 2020 8:02 pm
by loveinathens
Sorry I keep spamming you with questions. Do you have measurements for the Robot Graves neck? Like, how thick is it across the neck and what shape?
Re: Post'em Up Offsets with Aluminum Necks
Posted: Sat Feb 08, 2020 6:47 am
by AlumNeck
loveinathens wrote: ↑Thu Feb 06, 2020 8:02 pm
Sorry I keep spamming you with questions. Do you have measurements for the Robot Graves neck? Like, how thick is it across the neck and what shape?
No problem there is not a lot of info available. All these necks are relatively thin, I don't have measurements but it's a thin D shape and I would say a smooth but aggressive D shape. The Alef is in between kind off a C/D shape also really smooth and the EGC is more of a thin Fender C shape.
Re: Post'em Up Offsets with Aluminum Necks
Posted: Sat Feb 08, 2020 6:49 am
by AlumNeck
Re: Post'em Up Offsets with Aluminum Necks
Posted: Thu Feb 13, 2020 8:32 am
by Kwyjibo
Will posting mine soon. My aluminati neck is almost ready
Re: Post'em Up Offsets with Aluminum Necks
Posted: Thu Feb 13, 2020 10:26 am
by Embenny
Those are some gorgeous necks. Which one has the least "shoulder" to it? Do any have a V to them? I like a smooth round C with no D or V shoulders or peaks, respectively.
Re: Post'em Up Offsets with Aluminum Necks
Posted: Thu Feb 13, 2020 8:21 pm
by loveinathens
mbene085 wrote: ↑Thu Feb 13, 2020 10:26 am
Those are some gorgeous necks. Which one has the least "shoulder" to it? Do any have a V to them? I like a smooth round C with no D or V shoulders or peaks, respectively.
I hope it's nothing like an Ibanez Edge neck. I can deal with D shapes, but nothing like a real shredder as I'm used to either Fenders or my Dan Armstrong copy.
Re: Post'em Up Offsets with Aluminum Necks
Posted: Sat Feb 15, 2020 8:16 am
by AlumNeck
mbene085 wrote: ↑Thu Feb 13, 2020 10:26 am
Those are some gorgeous necks. Which one has the least "shoulder" to it? Do any have a V to them? I like a smooth round C with no D or V shoulders or peaks, respectively.
The Electrical Guitar company is the most C shaped of this group still relatively thin but feels more fender than shredder. The Aluminati not pictured is also round and in-between Fender and Gibson. Feels like a slightly fatter wider Fender neck.
Re: Post'em Up Offsets with Aluminum Necks
Posted: Sat Feb 15, 2020 8:22 am
by AlumNeck
loveinathens wrote: ↑Thu Feb 13, 2020 8:21 pm
mbene085 wrote: ↑Thu Feb 13, 2020 10:26 am
Those are some gorgeous necks. Which one has the least "shoulder" to it? Do any have a V to them? I like a smooth round C with no D or V shoulders or peaks, respectively.
I hope it's nothing like an Ibanez Edge neck. I can deal with D shapes, but nothing like a real shredder as I'm used to either Fenders or my Dan Armstrong copy.
I feel ya on this, I like trying different shapes and radius they have their advantages especially with chords. I have grown to appreciate both thick and thin necks too usually with flatter radius. The Robot graves is the most like this shredder with a D shape it's smooth though but its a D. I really like the feel of the Alef its smooth and feels fast and is in between D/C shape. Aluminati or EGC is the most "normal feeling neck" aluminum neck I have tried.
Re: Post'em Up Offsets with Aluminum Necks
Posted: Sun Feb 16, 2020 10:13 pm
by loveinathens
AlumNeck wrote: ↑Sat Feb 15, 2020 8:22 am
loveinathens wrote: ↑Thu Feb 13, 2020 8:21 pm
mbene085 wrote: ↑Thu Feb 13, 2020 10:26 am
Those are some gorgeous necks. Which one has the least "shoulder" to it? Do any have a V to them? I like a smooth round C with no D or V shoulders or peaks, respectively.
I hope it's nothing like an Ibanez Edge neck. I can deal with D shapes, but nothing like a real shredder as I'm used to either Fenders or my Dan Armstrong copy.
I feel ya on this, I like trying different shapes and radius they have their advantages especially with chords. I have grown to appreciate both thick and thin necks too usually with flatter radius. The Robot graves is the most like this shredder with a D shape it's smooth though but its a D. I really like the feel of the Alef its smooth and feels fast and is in between D/C shape. Aluminati or EGC is the most "normal feeling neck" aluminum neck I have tried.
This helps me a LOT. Thanks, bud!