Tuning screw for Univox Hi-Flier Phase 2

Bringing your older offset back to life.
Post Reply
User avatar
Sda
PAT PEND
PAT PEND
Posts: 2
Joined: Mon Dec 25, 2017 7:29 am

Tuning screw for Univox Hi-Flier Phase 2

Post by Sda » Sat Apr 18, 2020 5:56 am

Hi

I have bought myself a vintage Univox Hi-Flier Phase 2.
One of the original screws in the tuners went missing at some point and the previous owner replaced it with a generic screw
https://imgur.com/yqdWvq2
However the screw doesn't keep the tuner locked. I have tried a screw of my Spanish guitar since it looks the same, but it doesn't fit.
Does anyone know what screw I should get?
I could buy a total new set of tuners but wish to keep the original parts as much as possible.

Thanx for reading my post
Stijn

User avatar
SignoftheDragon
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 762
Joined: Thu Feb 18, 2010 11:06 am
Location: Utah, USA
Contact:

Re: Tuning screw for Univox Hi-Flier Phase 2

Post by SignoftheDragon » Fri Jun 05, 2020 12:22 pm

Looks like the same screws in my Univox (Mystery 12 string) tuners but I have no clue where to source just one.

User avatar
timtam
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1608
Joined: Sun Oct 22, 2017 2:42 am
Location: Melbourne

Re: Tuning screw for Univox Hi-Flier Phase 2

Post by timtam » Fri Jun 05, 2020 8:38 pm

Since a source hasn't materialized, but you have a sample of the right size, you can measure it with a screw size gauge and a thread gauge. And then go googling amongst the fastener companies for one that matches. A PITA but not impossible. But the new tuners might end up being the easier option. ;)
Image
Image

Post Reply