...I think that there's purpleburst lurking under that refin
- will
- PAT. # 2.972.923
- Posts: 1113
- Joined: Sat Oct 20, 2012 3:36 pm
- Contact:
...I think that there's purpleburst lurking under that refin
I've slowly been piecing together a Mustang Bass - it seems like prices have gone up a lot on these lately, but I'd managed to collect a few bits and pieces, and I had something with a Musicmaster Bass neck and a Squier Mustang Bass body working not too long ago.
I spotted an early-70's Bass on ebay that I bid on - I though it would go cheap because of a questionable repaint and weirdly-installed P-Bass pickup, but it ended up going for almost $800 when shipping was added in.
...then, naturally, it appeared on ebay again, only reduced to its component pieces. The Body didn't look too mutilated (I guess the P-Bass pickup was just kinda sitting in there?) Also, I was tempted by the bit of what looked like original green paint around the pickup rout. I figured that it would be fun to see if the original paint was under that orange-peeled layer of purple. If not, the price wasn't too awful for a slightly-molested Mustang body.
It arrived in the mail, and I did some wet-sanding in the stripe area - I figured that this would be the spot most likely to be wrecked by a refinisher who bothered to do surface prep.
Eureka! A stripe!
I used a random-orbital sander to get rid of the poly clearcoat and some of the purple - luckily, I could use the white and grey undercoats to see when I was getting close to the original finish. I had to be careful not to melt the poly - a clogged sanding disc would really heat up and make the finish reveal its plastic qualities!!
Next up, a lot of wet-sanding:
An issue I ran into was that the wet-sanding seemed to crack the paint in places, since the water would absorb into the wood and the swelling would crack the paint:
...so I dabbed some clear nail polish onto any exposed wood and screw holes. It seemed to help a little, though not as much as I would like. Maybe dripping some melted wax into the holes would work better?
...just about ready to buff it out! The finish exhibited all sorts of crazy wrinkles and places where the finish mooshed itself into bumps around the neck plate and bridge, but the sanding helped to even it out - thank heavens that the thick poly finish gave me plenty to work with!!
Here it is all together! Next step - find a decent white/mint/pearl pickguard. ...though the black guard might grow on me.
I'm amazed that someone would paint over a finish that was in such nice condition, and I feel like I've used up all of my "finding a nice original finish under a repaint" luck!
I spotted an early-70's Bass on ebay that I bid on - I though it would go cheap because of a questionable repaint and weirdly-installed P-Bass pickup, but it ended up going for almost $800 when shipping was added in.
...then, naturally, it appeared on ebay again, only reduced to its component pieces. The Body didn't look too mutilated (I guess the P-Bass pickup was just kinda sitting in there?) Also, I was tempted by the bit of what looked like original green paint around the pickup rout. I figured that it would be fun to see if the original paint was under that orange-peeled layer of purple. If not, the price wasn't too awful for a slightly-molested Mustang body.
It arrived in the mail, and I did some wet-sanding in the stripe area - I figured that this would be the spot most likely to be wrecked by a refinisher who bothered to do surface prep.
Eureka! A stripe!
I used a random-orbital sander to get rid of the poly clearcoat and some of the purple - luckily, I could use the white and grey undercoats to see when I was getting close to the original finish. I had to be careful not to melt the poly - a clogged sanding disc would really heat up and make the finish reveal its plastic qualities!!
Next up, a lot of wet-sanding:
An issue I ran into was that the wet-sanding seemed to crack the paint in places, since the water would absorb into the wood and the swelling would crack the paint:
...so I dabbed some clear nail polish onto any exposed wood and screw holes. It seemed to help a little, though not as much as I would like. Maybe dripping some melted wax into the holes would work better?
...just about ready to buff it out! The finish exhibited all sorts of crazy wrinkles and places where the finish mooshed itself into bumps around the neck plate and bridge, but the sanding helped to even it out - thank heavens that the thick poly finish gave me plenty to work with!!
Here it is all together! Next step - find a decent white/mint/pearl pickguard. ...though the black guard might grow on me.
I'm amazed that someone would paint over a finish that was in such nice condition, and I feel like I've used up all of my "finding a nice original finish under a repaint" luck!
Last edited by will on Tue Feb 14, 2017 1:37 pm, edited 2 times in total.
- antisymmetric
- PAT. # 2.972.923
- Posts: 3605
- Joined: Mon Apr 26, 2010 11:32 pm
- Location: New Zealand
Re: ...I think that there's purpleburst lurking under that r
Well played!
Watching the corners turn corners
- MechaBulletBill
- PAT. # 2.972.923
- Posts: 2823
- Joined: Sat Nov 09, 2013 8:16 am
- Location: UK
- _nash
- PAT. # 2.972.923
- Posts: 873
- Joined: Thu Mar 24, 2011 1:35 pm
- Location: Arizona
- Contact:
Re: ...I think that there's purpleburst lurking under that r
I'm reading this thinking, "When's this going to turn ugly...." and it never did! That's a great looking bass!
- StevenO
- PAT. # 2.972.923
- Posts: 17771
- Joined: Wed Oct 18, 2006 7:06 pm
Re: ...I think that there's purpleburst lurking under that r
My thoughts exactly._nash wrote:I'm reading this thinking, "When's this going to turn ugly...." and it never did! That's a great looking bass!
Fantastic save!
- will
- PAT. # 2.972.923
- Posts: 1113
- Joined: Sat Oct 20, 2012 3:36 pm
- Contact:
Re: ...I think that there's purpleburst lurking under that r
Yeah, probably the next time I try to do this, I'll find a painted-over hole through the body that was filled with Elmer's glue-soaked newspaper._nash wrote:I'm reading this thinking, "When's this going to turn ugly...." and it never did! That's a great looking bass!
- marqueemoon
- PAT. # 2.972.923
- Posts: 7401
- Joined: Mon Jun 20, 2016 9:37 pm
- Location: Seattle
Re: ...I think that there's purpleburst lurking under that r
Glad to see your skill and patience rewarded. That looks great.
- volhoo
- PAT. # 2.972.923
- Posts: 131
- Joined: Thu Nov 17, 2016 12:53 pm
- Location: SoCal
Re: ...I think that there's purpleburst lurking under that r
Oh wow - I didn't see that coming - well done.
That's a real beauty.
The black guard works for me.
-
That's a real beauty.
The black guard works for me.
-
- StevenO
- PAT. # 2.972.923
- Posts: 17771
- Joined: Wed Oct 18, 2006 7:06 pm
Re: ...I think that there's purpleburst lurking under that r
You should see what kind of super rare custom colour is under the stock purple burst. Don't stop sanding until you find it!
- will
- PAT. # 2.972.923
- Posts: 1113
- Joined: Sat Oct 20, 2012 3:36 pm
- Contact:
Re: ...I think that there's purpleburst lurking under that r
Super-rare prototype unfinished alder! Only one in existence!StevenO wrote:You should see what kind of super rare custom colour is under the stock purple burst. Don't stop sanding until you find it!
- nanamour
- PAT. # 2.972.923
- Posts: 791
- Joined: Wed Aug 14, 2013 8:22 pm
- Location: Hell's Kitchen
Re: ...I think that there's purpleburst lurking under that r
Outstanding work!
...although I kind of like the paint wrinkle (?) lines under the pickguard halfway through the sanding process
They look like topographic lines or sand ripples
...although I kind of like the paint wrinkle (?) lines under the pickguard halfway through the sanding process
They look like topographic lines or sand ripples
- spacecadet
- PAT. # 2.972.923
- Posts: 4351
- Joined: Wed Apr 25, 2007 9:03 am
- Location: Long Island, NY
- Contact:
Re: ...I think that there's purpleburst lurking under that r
That's crazy. Somebody was straight up jacked on crack for painting over that. But I guess there was a time (the 80s) when comp stripes just looked dated - the new hotness was pointy guitars in garish colors. It's nice to see one competition finish brought back, though.
-
- PAT. # 2.972.923
- Posts: 2590
- Joined: Tue Oct 09, 2012 5:36 pm
Re: ...I think that there's purpleburst lurking under that r
Gorgeous!! Beautiful work.
- PorkyPrimeCut
- PAT. # 2.972.923
- Posts: 24472
- Joined: Tue Nov 28, 2006 7:46 am
- Location: Leipzig
- Contact:
Re: ...I think that there's purpleburst lurking under that r
Ha! Incredible!!
It's amazing that this worked out so well.
Congratulations!....and yes, that black guard works really well.
It's amazing that this worked out so well.
Congratulations!....and yes, that black guard works really well.
You think you can't, you wish you could, I know you can, I wish you would. Slip inside this house as you pass by.
- mcjt
- PAT. # 2.972.923
- Posts: 4295
- Joined: Fri Dec 29, 2006 2:17 pm
- Location: Côte-St-Luc QC
Re: ...I think that there's purpleburst lurking under that r
WOW! incredible save, Will!