Ain't nuthin' like the real thing...Fender Rhodes Restoration

All instruments that aren't guitars (or bass guitars).
User avatar
d-rock
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1181
Joined: Mon Apr 28, 2008 5:11 am
Location: Atlanta

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by d-rock » Mon Jan 22, 2018 6:09 am

I set out to fix some broken bridle straps. Luckily I didn't have many to replace. One end attaches to the aluminium damper comb (where they typically tear). The back end is super glued to the plastic hammer. In order to change them out you need to scrape out the cloth strap and all super glue residue with a utility knife. Then you need to re-glue new straps. Make sure you don't use too much super glue or you will create unwanted friction points or have the strap stick to places and points they shouldn't. Ask me how I know.

Before...
Image

After...
Image

I also realized that I had a broken tooth on a damper comb. I found someone selling vintage combs for a decent price on Reverb. Next is installing the new one after it comes in the mail. Here's a pic of the broken tooth (second from the right)...
Image

User avatar
d-rock
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1181
Joined: Mon Apr 28, 2008 5:11 am
Location: Atlanta

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by d-rock » Thu Feb 01, 2018 5:38 am

Here's the new damper comb with the new bridle straps installed.
Image

I also got to work on the keybed. I replaced all the old balance rail felts with fresh ones. I also leveled the keybed with some paper punchings to get everything nice and even.
Image
Image

The old name rail felt was kind of worn and gross. I scraped off the old and installed a fresh one. I also took the opportunity to clean a lot of grime from the aluminum name rail and knobs. While it was all apart I resoldered some loose wires to the pots.
Image
Image

User avatar
Telliot
Mods
Mods
Posts: 12196
Joined: Thu Mar 17, 2011 6:38 pm
Location: CA

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by Telliot » Thu Feb 01, 2018 5:46 am

This is amazing. How much has this cost you so far, not including the actual piano?
The cool thing about fretless is you can hit a note...and then renegotiate.

User avatar
d-rock
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1181
Joined: Mon Apr 28, 2008 5:11 am
Location: Atlanta

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by d-rock » Thu Feb 01, 2018 6:17 am

Telliot wrote:
Thu Feb 01, 2018 5:46 am
This is amazing. How much has this cost you so far, not including the actual piano?
I just did a quick breakdown in my head and figured the total cost to refurbish this will be $200.

My next big thing would be to replace all the screws and rubber grommets for the tines and tonebars in the harp.

User avatar
higgsblossom
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1065
Joined: Thu Jan 09, 2014 2:55 am
Location: Mannheim, Germany

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by higgsblossom » Thu Feb 01, 2018 11:26 am

Wow. Subscribed.
"500€? That's the price of a J Mascis Jazzmaster!"

User avatar
d-rock
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1181
Joined: Mon Apr 28, 2008 5:11 am
Location: Atlanta

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by d-rock » Fri Feb 02, 2018 11:08 am

Got to work on replacing all the screws/washers/grommets inside the harp for the tonebars and tines.

New rubber grommets on the top row...
Image

New screws and washers...
Image

And setting the escapement. You can see I made a 3/8" block to be a guide for all the tonebars. It really helped.
Image

User avatar
higgsblossom
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1065
Joined: Thu Jan 09, 2014 2:55 am
Location: Mannheim, Germany

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by higgsblossom » Fri Feb 02, 2018 2:25 pm

I can’t wait to hear it when it’s all done. Great work and very interesting to see the steps of your restoration in pictures. I am a bit jealous... just a little bit.
"500€? That's the price of a J Mascis Jazzmaster!"

User avatar
mevans0324
PAT PEND
PAT PEND
Posts: 17
Joined: Sat Jan 13, 2018 2:11 pm

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by mevans0324 » Sat Feb 03, 2018 5:09 am

Great thread and a worthy endeavor! can't wait to see the finished product.

User avatar
d-rock
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1181
Joined: Mon Apr 28, 2008 5:11 am
Location: Atlanta

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by d-rock » Mon Feb 05, 2018 4:56 am

I made some great progress this weekend. After installing the new screws and grommets I got to the setup stage where I really fine tuned the harp of the instrument. I had to set the escapement, check the key dip, set the strike line, and voice the piano. Vintage Vibe's YouTube videos are the most amazing resource for this. I've watched all their tech tips multiple times.

I was able to get the baby all buttoned up and playable. After two months of restoration it was very gratifying putting the lid on and firing her up!

Image
Image

There are still a couple outstanding things I would like to work on. I would like to eventually re-tolex the case and install new hammer tips. The original ones are pretty grooved from over 40 years of playing. The piano plays great in the lower 4 octaves but when you get up in the higher registers the notes don't ring as nicely. Amplified it sounds pretty good, but unplugged the hammers thud a bit and don't have as nice of a bounce to the keys. I think fresh rubber tips will help.

Overall I'm really happy with how this turned out. She's definitely a player and not showroom quality, but that's alright. There's a personality and character to it. This instrument will be well loved.

User avatar
higgsblossom
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1065
Joined: Thu Jan 09, 2014 2:55 am
Location: Mannheim, Germany

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by higgsblossom » Mon Feb 05, 2018 5:08 am

Wow! Looks beautiful.
"500€? That's the price of a J Mascis Jazzmaster!"

monkeybeats
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 118
Joined: Wed Sep 28, 2011 8:13 am
Location: London

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by monkeybeats » Mon Feb 05, 2018 5:32 am

Great work!

User avatar
mackerelmint
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 13674
Joined: Sun May 05, 2013 9:51 pm
Location: トイレ国、ウンチ市

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by mackerelmint » Mon Feb 05, 2018 6:22 pm

Very nice. This is a satisfying thread for sure.
This is an excellent rectangle

User avatar
d-rock
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1181
Joined: Mon Apr 28, 2008 5:11 am
Location: Atlanta

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by d-rock » Wed Feb 07, 2018 8:34 am

Thanks all. Still working on voicing the piano but I recorded a little clip. One of the songs that made me fall in love with the Rhodes sound...

https://youtu.be/Yy8kraR-iyo

User avatar
Telliot
Mods
Mods
Posts: 12196
Joined: Thu Mar 17, 2011 6:38 pm
Location: CA

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by Telliot » Wed Feb 07, 2018 9:50 am

Sounds great!! :-* :w00t: :-*

That's one of the songs that made me fall in love with the Rhodes as well, but if I had to point to one specific thing that became THE Rhodes 'sound' for me, it would have to be Bob James - You're As Right As Rain. My dad had this record when I was a kid, and I used to play it on my little Fisher Price record player in my room as I drew or played with Legos. I must have been no more than 5 or 6, but it made a huge impression on me. If you aren't familiar, you can stream the whole LP here. Tons of great Rhodes tonz to be had.
The cool thing about fretless is you can hit a note...and then renegotiate.

User avatar
higgsblossom
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1065
Joined: Thu Jan 09, 2014 2:55 am
Location: Mannheim, Germany

Re: Ain't nuthin' like the real thing...Fender Rhodes Restoration

Post by higgsblossom » Wed Feb 07, 2018 10:41 am

Sounds great!
"500€? That's the price of a J Mascis Jazzmaster!"

Post Reply