Gold Anodized pickguard for Fender Japan Jazzmaster '93
- frail
- PAT PEND
- Posts: 4
- Joined: Thu Feb 15, 2018 1:57 am
Gold Anodized pickguard for Fender Japan Jazzmaster '93
Hello all!
New JAZZMASTER owner and new member here!
I would like to install a Gold Anodized Pickguard on my MIJ Jazzmaster.
1) I am in Europe and I would like to find a cheap solution, I would not like to spend 100$,
2) Do USA Jazzmaster Pickguards fit on my guitar?
Thanks a lot
New JAZZMASTER owner and new member here!
I would like to install a Gold Anodized Pickguard on my MIJ Jazzmaster.
1) I am in Europe and I would like to find a cheap solution, I would not like to spend 100$,
2) Do USA Jazzmaster Pickguards fit on my guitar?
Thanks a lot
- Embenny
- PAT. # 2.972.923
- Posts: 10363
- Joined: Tue May 24, 2016 5:07 am
Re: Gold Anodized pickguard for Fender Japan Jazzmaster '93
No, USA spec pickguards won't fit, including all the anodized guards.
MIJ anodized guards do exist, as they're offered on a few models in Japan, but I've never seen them on the aftermarket.
MIJ anodized guards do exist, as they're offered on a few models in Japan, but I've never seen them on the aftermarket.
The artist formerly known as mbene085.
- Witchburner
- PAT. # 2.972.923
- Posts: 59
- Joined: Fri Aug 18, 2017 12:09 pm
- Location: 71st
Re: Gold Anodized pickguard for Fender Japan Jazzmaster '93
would the J mascis MIJ fit on yours? or is the bridge mounting points different
Just an idea
I mean you also pay for what you get, high quality perfectly matched materials, you could perhaps get a shop to custom make it to your specs for the same or less price, explore your options
good luck dude
Just an idea
I mean you also pay for what you get, high quality perfectly matched materials, you could perhaps get a shop to custom make it to your specs for the same or less price, explore your options
good luck dude
- frail
- PAT PEND
- Posts: 4
- Joined: Thu Feb 15, 2018 1:57 am
Re: Gold Anodized pickguard for Fender Japan Jazzmaster '93
thank you very much guys,
No idea about the J Mascis Japan JM fitting... but I read that one has an adjustomatic bridge..
seems a difficult task
exploring other color options for the pickguard since I love the guitar
No idea about the J Mascis Japan JM fitting... but I read that one has an adjustomatic bridge..
seems a difficult task
exploring other color options for the pickguard since I love the guitar
- biggs
- PAT PEND
- Posts: 1
- Joined: Tue Feb 27, 2018 5:26 am
Re: Gold Anodized pickguard for Fender Japan Jazzmaster '93
Hello all,
I'm very interested in any kind of solution you may find !
There should be someone who sells a gold pickguard that fits MIJ/CIJ somewhere !
I'm very interested in any kind of solution you may find !
There should be someone who sells a gold pickguard that fits MIJ/CIJ somewhere !
- spacecadet
- PAT. # 2.972.923
- Posts: 4351
- Joined: Wed Apr 25, 2007 9:03 am
- Location: Long Island, NY
- Contact:
Re: Gold Anodized pickguard for Fender Japan Jazzmaster '93
This topic comes up periodically. There aren't a lot of options. It basically comes down to:
1) Fender Japan made/make them for JM's with standard bridges, although good luck waiting for one to come up separately.
2) Tone Guard might make you one, although I doubt it'd be cheap.
3) Allparts made/make them for both American and Japanese JM's, but you have to be really careful making sure of which one you're getting because they don't even really know.
I think your best bet is going to be hunting for an Allparts, if you don't want to pay more than $100. But study the visual difference between US and Japanese pickguards so you can tell what any given listing is actually selling. The easiest way I've found to tell the difference is that the short edge next to the bridge pickup just before it curves around to the bridge is 90 degrees and straight on Japanese pickguards, whereas it tapers on American ones.
Japanese: https://reverb.com/item/2046923-fender- ... -pickguard (unfortunately this one sold long ago)
American: https://reverb.com/item/903961-fender-j ... d-anodized
If you see that little taper just before the curve around to the bridge, it's American fit.
This one, for example, is a pic of a Japanese pickguard, but the description says it's American fit: https://www.ebay.com/itm/NEW-Pickguard- ... SwySlZ608k
You could at least email and ask for an actual pic of the item. (Pretty sure this listing was there the last time this topic came up.)
1) Fender Japan made/make them for JM's with standard bridges, although good luck waiting for one to come up separately.
2) Tone Guard might make you one, although I doubt it'd be cheap.
3) Allparts made/make them for both American and Japanese JM's, but you have to be really careful making sure of which one you're getting because they don't even really know.
I think your best bet is going to be hunting for an Allparts, if you don't want to pay more than $100. But study the visual difference between US and Japanese pickguards so you can tell what any given listing is actually selling. The easiest way I've found to tell the difference is that the short edge next to the bridge pickup just before it curves around to the bridge is 90 degrees and straight on Japanese pickguards, whereas it tapers on American ones.
Japanese: https://reverb.com/item/2046923-fender- ... -pickguard (unfortunately this one sold long ago)
American: https://reverb.com/item/903961-fender-j ... d-anodized
If you see that little taper just before the curve around to the bridge, it's American fit.
This one, for example, is a pic of a Japanese pickguard, but the description says it's American fit: https://www.ebay.com/itm/NEW-Pickguard- ... SwySlZ608k
You could at least email and ask for an actual pic of the item. (Pretty sure this listing was there the last time this topic came up.)
- kalipigeon
- PAT. # 2.972.923
- Posts: 1423
- Joined: Wed Jun 04, 2008 11:31 pm
- Location: Little Rock, AR, USA, Earth
- Contact:
Re: Gold Anodized pickguard for Fender Japan Jazzmaster '93
If you're going primarily for color/texture and not the actual metal aspect of the gold guard, another option is https://www.wdmusic.com/.
I got one of their gold brushed guards for my CV 50's Tele in white blonde and it is a very convincing metallic effect. It does sit on a black plastic backing, so its almost like a black outline around the guard where the bevels are present.
Its this material: https://www.wdmusic.com/fender_jazzmast ... -1414.html
They're a bit vague about which models they have available on offsets, but they are pretty good about having odd models and tracings kicking around. You could always email/call them or send them a tracing and see.
I got one of their gold brushed guards for my CV 50's Tele in white blonde and it is a very convincing metallic effect. It does sit on a black plastic backing, so its almost like a black outline around the guard where the bevels are present.
Its this material: https://www.wdmusic.com/fender_jazzmast ... -1414.html
They're a bit vague about which models they have available on offsets, but they are pretty good about having odd models and tracings kicking around. You could always email/call them or send them a tracing and see.
- sa1126
- PAT. # 2.972.923
- Posts: 710
- Joined: Mon Feb 28, 2011 7:17 am
Re: Gold Anodized pickguard for Fender Japan Jazzmaster '93
Old thread, but worth a bump.
The WD guard is crap IMO, and their customer service is horrible. The gold guard is a clear plastic piece ontop of some gold foil and it doesn't look very nice at all. I told them it wasn't as advertised and they didn't even respond.
I am working with an Aussie builder on here to get a gold guard for my CIJ -- I will report as soon as I can get it!
The WD guard is crap IMO, and their customer service is horrible. The gold guard is a clear plastic piece ontop of some gold foil and it doesn't look very nice at all. I told them it wasn't as advertised and they didn't even respond.
I am working with an Aussie builder on here to get a gold guard for my CIJ -- I will report as soon as I can get it!
Gibson Les Paul Custom --> Orange AD30
great deals with dug, grandmasterdavid, ChrisFFTA, Bryce_dude13, cestlamort, jimi, HNB,blake480,DocCarlson,
Gonkulator, AWSchmit, billboneys, panoramic,Gavanti,seancomm,Swansonron,Con-Tiki!
great deals with dug, grandmasterdavid, ChrisFFTA, Bryce_dude13, cestlamort, jimi, HNB,blake480,DocCarlson,
Gonkulator, AWSchmit, billboneys, panoramic,Gavanti,seancomm,Swansonron,Con-Tiki!
- kalipigeon
- PAT. # 2.972.923
- Posts: 1423
- Joined: Wed Jun 04, 2008 11:31 pm
- Location: Little Rock, AR, USA, Earth
- Contact:
Re: Gold Anodized pickguard for Fender Japan Jazzmaster '93
That's one of their gold guards and not the one I was referring to. The other is backed by 1 ply black plastic and has a metallic feeling brushed metal look. This one is rather nice - even if not identical to an aluminum guard.
- sonofmustangford
- PAT PEND
- Posts: 33
- Joined: Thu Jun 24, 2010 8:38 pm
- Location: Australia
Re: Gold Anodized pickguard for Fender Japan Jazzmaster '93
I'm after an anodised gold guard for my Japanese JM. Found this https://www.soundhouse.co.jp/products/d ... em/101761/ which is under $100 Aus dollars and is clearly meant for a JM66 but I don't think they ship internationally. I also found this https://untake-guitars.jp/product-categ ... pickguard/ which is a bit more expensive. It appears to be an Allparts Japan product so why they are not on eBay is beyond me. How do I contact the Australian maker of anodised guards?