Re: your effects setup?

Everyone needs a stompbox.
Post Reply
User avatar
MechaBulletBill
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2820
Joined: Sat Nov 09, 2013 8:16 am
Location: UK

Re: your effects setup?

Post by MechaBulletBill » Sat Jun 03, 2017 5:36 am

MechaBulletBill wrote:Image
I can confirm that the creepyface/broadcast combo sounds pretty fuckin incredible at gig volume. I think the extra amp volume on a stage versus a cramped practice room gave me a bit more wooly compression than I was hoping for, I'll have to adjust for that next time coz I wasn't able to go as clean as I wanted to without being too quiet.

User avatar
Oyster Boy
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 314
Joined: Thu Jun 21, 2007 10:33 am
Location: Portland Oregon

Re: your effects setup?

Post by Oyster Boy » Sun Jun 04, 2017 4:23 pm

Redid my board again!
Image

I can't seem to stop rebuilding it.

Yeatzee
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 76
Joined: Sun Jun 04, 2017 7:36 am
Location: SoCal

Re: your effects setup?

Post by Yeatzee » Sun Jun 04, 2017 4:30 pm

Just recently went from this (on the left)
Image

To this

Image

Couldn't be happier honestly! It's ridiculously powerful and versatile, for live use its been a game changer.

User avatar
smallerthings
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 68
Joined: Fri Aug 02, 2013 9:43 am

Re: your effects setup?

Post by smallerthings » Wed Jun 07, 2017 3:32 pm

I've been moving things around a lot the past week, but for now I'm good. It's a bit absurd to have 4 fuzz pedals on your board, but whatever.

Little Bear BS-1 - Woolly Mammoth clone for my super gated noise fuzz
OBNE Haunt - Compressed gated fuzz with with a more bassy tone for rhythm
Caroline Shigeharu - High treble fuzz to really cut through and stand out. Very articulate
EHX Soul Food - Clean boost
Joyo Ultimate Drive - Light OD
Caroline Olympia - Pretty redundant, but it's a hairy fuzz that kind of sits between the Shigeharu and Haunt as far as tone goes
Donner Tutti Love - Simple/cheap chorus for a nice subtle effect
TC Prophet - Really awesome digital delay for a great price
Digitech Polara - Reverb workhorse

And at the very end I have a Walrus Plainsman boost turned all the way down as a kill switch. It's only there because I had it laying around and figured I might as well put it to some use.

Eventually I'd like to make a bass board and I'll put the redundancy of the Olympia, Plainsman, and another fuzz & delay I have on that.

Image

User avatar
parry
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 8509
Joined: Sat Apr 05, 2008 10:08 am
Location: Ontario, CANADA
Contact:

Re: your effects setup?

Post by parry » Thu Jun 08, 2017 5:01 am

Image

I've been getting all kinds of mileage out of this board.
Chain goes: Jazzmaster >> AUX dirt up front - gritty, broken-sounding treble/full boost, followed by a customized Electra for more mid-range EQ'ing/boost >> 600D >> Ghost Delay >> Reverberation Machine >> DD7 (used as a looper and sometimes for subtle reverse delay) >> EHx Freeze >> EQD Hummingbird >> Super Reverb with the reverb dimed.

I almost always have the Deranger and 600 on; and surprisingly use the Freeze a LOT more than I thought I ever would. That said, whenever I do use it... my goal is to use it discretely, so that you don't notice it's there (they have a very "distinctive" sound that you can pick out from a mile away); but if I didn't use it, you definitely know something is missing from that part. The rest is season-to-taste.
:)
Fighting for peace is like fucking for virginity.

User avatar
Shadoweclipse13
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 12445
Joined: Fri Feb 07, 2014 9:22 pm
Location: Stuck in the dimension of imagination

Re: your effects setup?

Post by Shadoweclipse13 » Thu Jun 08, 2017 6:05 am

This whole page is amazing ;D So many great looking boards!
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384

User avatar
mathias
PAT PEND
PAT PEND
Posts: 40
Joined: Thu May 28, 2015 1:01 pm

Re: your effects setup?

Post by mathias » Thu Jun 08, 2017 6:08 am

parry, do you have a link to Aux Effects? Their name, even with the pedal names shown here, is hard to Google.

User avatar
parry
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 8509
Joined: Sat Apr 05, 2008 10:08 am
Location: Ontario, CANADA
Contact:

Re: your effects setup?

Post by parry » Thu Jun 08, 2017 6:34 am

mathias,
Thanks for asking! I don't have a site because to this point, I've really only been building them for myself and friends. I'll occasionally sell (or trade) the odd thing I've built, but I've yet to really dive in. That said, I've been thinking I might build small batches of the two on my board, built as a 2-in-1. They seem to pair together quite well. If you're interested in how that goes, I'm on Instagram @ sounds_like_broken.
Fighting for peace is like fucking for virginity.

User avatar
a reminder
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 563
Joined: Tue Oct 03, 2006 9:39 am
Location: N54 03 04 W4 48 50

Re: your effects setup?

Post by a reminder » Fri Jun 09, 2017 9:14 am

Less is more !! :D

Image

User avatar
mathias
PAT PEND
PAT PEND
Posts: 40
Joined: Thu May 28, 2015 1:01 pm

Re: your effects setup?

Post by mathias » Fri Jun 09, 2017 11:15 am

parry wrote:mathias,
Thanks for asking! I don't have a site because to this point, I've really only been building them for myself and friends. I'll occasionally sell (or trade) the odd thing I've built, but I've yet to really dive in. That said, I've been thinking I might build small batches of the two on my board, built as a 2-in-1. They seem to pair together quite well. If you're interested in how that goes, I'm on Instagram @ sounds_like_broken.
Your finishes look so pro, I figured you were already in business! Good job! Also, I'd be curious in your stuff, if you do ever start building to order!

User avatar
marqueemoon
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 7383
Joined: Mon Jun 20, 2016 9:37 pm
Location: Seattle

Re: your effects setup?

Post by marqueemoon » Fri Jun 09, 2017 2:19 pm

mathias wrote:
parry wrote:mathias,
Thanks for asking! I don't have a site because to this point, I've really only been building them for myself and friends. I'll occasionally sell (or trade) the odd thing I've built, but I've yet to really dive in. That said, I've been thinking I might build small batches of the two on my board, built as a 2-in-1. They seem to pair together quite well. If you're interested in how that goes, I'm on Instagram @ sounds_like_broken.
Your finishes look so pro, I figured you were already in business! Good job! Also, I'd be curious in your stuff, if you do ever start building to order!
Also following now. Cool stuff.

User avatar
parry
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 8509
Joined: Sat Apr 05, 2008 10:08 am
Location: Ontario, CANADA
Contact:

Re: your effects setup?

Post by parry » Fri Jun 09, 2017 3:38 pm

marqueemoon wrote:
mathias wrote:
parry wrote:mathias,
Thanks for asking! I don't have a site because to this point, I've really only been building them for myself and friends. I'll occasionally sell (or trade) the odd thing I've built, but I've yet to really dive in. That said, I've been thinking I might build small batches of the two on my board, built as a 2-in-1. They seem to pair together quite well. If you're interested in how that goes, I'm on Instagram @ sounds_like_broken.
Your finishes look so pro, I figured you were already in business! Good job! Also, I'd be curious in your stuff, if you do ever start building to order!
Also following now. Cool stuff.
Thanks, you guys.

@marqueemoon: I thought I recognized the name on your IG account. After a bit of digging, I realized I've been enjoying your EP since you posted it up, here 8)
Fighting for peace is like fucking for virginity.

User avatar
marqueemoon
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 7383
Joined: Mon Jun 20, 2016 9:37 pm
Location: Seattle

Re: your effects setup?

Post by marqueemoon » Fri Jun 09, 2017 7:42 pm

parry wrote:@marqueemoon: I thought I recognized the name on your IG account. After a bit of digging, I realized I've been enjoying your EP since you posted it up, here
Nice. Glad you like it. Hoping to get some more recordings going soon.

User avatar
MT
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2221
Joined: Fri Jul 11, 2008 4:59 am
Location: Brisbane Australia

Re: your effects setup?

Post by MT » Sat Jun 10, 2017 4:55 am

Current board.
Image

User avatar
thegumbootman
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 830
Joined: Thu Dec 16, 2010 5:17 pm
Location: Sydney, Australia

Re: your effects setup?

Post by thegumbootman » Sat Jun 10, 2017 9:01 am

^ I love the Tym lego pedal.

I've been really curious about trying out a Tym Big Mud.

Post Reply