Me too.JJ Gabor wrote: ....I quite like the look of the silver boxes with big dial knobs.....
Post pics of your entire pedal collection!
- PorkyPrimeCut
- PAT. # 2.972.923
- Posts: 24472
- Joined: Tue Nov 28, 2006 7:46 am
- Location: Leipzig
- Contact:
Re: Post pics of your entire pedal collection!
You think you can't, you wish you could, I know you can, I wish you would. Slip inside this house as you pass by.
- Pacafeliz
- PAT. # 2.972.923
- Posts: 18570
- Joined: Sun Jul 29, 2007 6:34 pm
- Location: Cococologne, Germany
Re: Post pics of your entire pedal collection!
here's some fresh pics of mine!
the small ones:
the big ones:
the really big ones:
Pat.
the small ones:
the big ones:
the really big ones:
Pat.
i love delay SO much ...that i procrastinate all the time.
- Rangelife
- PAT. # 2.972.923
- Posts: 123
- Joined: Tue Jun 03, 2008 1:32 pm
- Location: Stockholm, Sweden
Re: Post pics of your entire pedal collection!
Wasn't as bad as I thought it'd be.
Let's see if I get this right...
First:
Sovtek - Big Muff Pi, EHX - Big Muff Pi, Fender Blender
Second:
Marshall - Shred Master, ProCo - Turbo Rat, T-Rex - Bloody Mary, T-Rex - Mudhoney
Third:
Korg - DT10, T-Rex - Comp-Nova (+boost mod.), Ibanez - SF10, Ibanez - FL9, EHX - Small Stone, Dunlop - Crybaby
Fourth:
EHX - #1 Echo, Ibanez - AD9, Boss - Chorus CE3, VOX - VibraVOX
And a most of my DIY effects... Should probably go somewhere else.
First:
Fuzz Plant (3-knob Fuzz Factory clone, believe it was called "Vorpal Fuzz"), Fuzz Face '69 (Musikding), Fuzz Face '69 (GGG)
Second:
Mighty Mouse (BYOC 3-way switch), Mighty Mouse (BYOC rotary switch), Large Beaver (BYOC - Triangle spec.), Big Muff (GGG - Russian Spec.)
Third:
Si-Fuzz (Moody Sounds + High/low-gain switch & Bias knob), Bender (Musikding), Screamer (Musikding - TS-808 spec.), Tremolo (Moody Sounds + vol. knob)
Fourth:
Empire Fuzz (BYOC Octave Fuzz), Boba Fuzz (BYOC E.S.V. Tonebender MKII), Phake90 (BYOC Phase90), 2*Si-Fuzz (Moody Sounds + Bias knob, foot switch removed))
Oh, and another Si-Fuzz (Moody Sounds - Star Wars theme, + high/low gain switch & Bias knob)
And another Screamer (Musikding, TS-808 spec.)
And an EHX - LPB clone
Let's see if I get this right...
First:
Sovtek - Big Muff Pi, EHX - Big Muff Pi, Fender Blender
Second:
Marshall - Shred Master, ProCo - Turbo Rat, T-Rex - Bloody Mary, T-Rex - Mudhoney
Third:
Korg - DT10, T-Rex - Comp-Nova (+boost mod.), Ibanez - SF10, Ibanez - FL9, EHX - Small Stone, Dunlop - Crybaby
Fourth:
EHX - #1 Echo, Ibanez - AD9, Boss - Chorus CE3, VOX - VibraVOX
And a most of my DIY effects... Should probably go somewhere else.
First:
Fuzz Plant (3-knob Fuzz Factory clone, believe it was called "Vorpal Fuzz"), Fuzz Face '69 (Musikding), Fuzz Face '69 (GGG)
Second:
Mighty Mouse (BYOC 3-way switch), Mighty Mouse (BYOC rotary switch), Large Beaver (BYOC - Triangle spec.), Big Muff (GGG - Russian Spec.)
Third:
Si-Fuzz (Moody Sounds + High/low-gain switch & Bias knob), Bender (Musikding), Screamer (Musikding - TS-808 spec.), Tremolo (Moody Sounds + vol. knob)
Fourth:
Empire Fuzz (BYOC Octave Fuzz), Boba Fuzz (BYOC E.S.V. Tonebender MKII), Phake90 (BYOC Phase90), 2*Si-Fuzz (Moody Sounds + Bias knob, foot switch removed))
Oh, and another Si-Fuzz (Moody Sounds - Star Wars theme, + high/low gain switch & Bias knob)
And another Screamer (Musikding, TS-808 spec.)
And an EHX - LPB clone
- PorkyPrimeCut
- PAT. # 2.972.923
- Posts: 24472
- Joined: Tue Nov 28, 2006 7:46 am
- Location: Leipzig
- Contact:
Re: Post pics of your entire pedal collection!
Boba Fuzz. I like it!!
You think you can't, you wish you could, I know you can, I wish you would. Slip inside this house as you pass by.
- Rangelife
- PAT. # 2.972.923
- Posts: 123
- Joined: Tue Jun 03, 2008 1:32 pm
- Location: Stockholm, Sweden
Re: Post pics of your entire pedal collection!
Thank's! It sounds great too, one of my favourites! The paint got a bit cracked since I put on too much paint but it turned out OK.PorkyPrimeCut wrote: Boba Fuzz. I like it!!
I have poor imagination when it comes to designing and coming up with good names...
- eupat
- PAT. # 2.972.923
- Posts: 2557
- Joined: Wed Oct 25, 2006 2:13 am
- Location: france
Re: Post pics of your entire pedal collection!
this thread gives me GAS !!!!
si t'as mal aux cervicales, arrête le métal!
- Ti-Ron
- PAT. # 2.972.923
- Posts: 606
- Joined: Mon Nov 10, 2008 4:53 pm
- Location: Montreal, Qc, Cdn
Re: Post pics of your entire pedal collection!
It's not a problem yet, but for my girlfriend it's totaly useless 'cause I always swap them, but since the last 6 months I keep the same. She never heard about the tone quest!!
First row: Malekko Delay 600 bright and a Catalinbread semaphore Trem
Second row: Goudie FX 808+ (TS like with a couple of tweaks) Subdecay BlackStar and a CryBaby hardly modded by Greg at SolidgoldFX
Third row: Toadworks meat(double booster) and my first pedal ever rehoused a DOD grunge!!!!
First row: Malekko Delay 600 bright and a Catalinbread semaphore Trem
Second row: Goudie FX 808+ (TS like with a couple of tweaks) Subdecay BlackStar and a CryBaby hardly modded by Greg at SolidgoldFX
Third row: Toadworks meat(double booster) and my first pedal ever rehoused a DOD grunge!!!!
Last edited by Ti-Ron on Tue Jan 13, 2009 9:41 am, edited 1 time in total.
Re: Post pics of your entire pedal collection!
Hey, Pat. How do you like that Univox phaser? I think Adam Franklin used to use one of those in addition to a Small Stone.
- mynameisjonas
- Admin
- Posts: 12703
- Joined: Tue Sep 12, 2006 5:55 am
- Location: Stockholm, Sweden
- Contact:
Re: Post pics of your entire pedal collection!
here are all my pedals (i think):
top row:
alesis nanoverb + bypass box
80s turbo rat
BYOC distortion+ with mods
boss TU-2
second row:
behringer ultra octaver
screamer (modded TS9 clone)
murph II (modded big muff clone)
boss SD-1 (yes, i did some mods to this one too)
digitech digiverb
third row:
ibanez PD7 phat-hed bass overdrive
face (silicon fuzz face with added controls)
MXR micro amp
red llama clone
rangemaster clone
artec fuzztown
botton row:
danelectro fab overdrive
sovtek big muff
EHX big muff with tons of mods
top row:
alesis nanoverb + bypass box
80s turbo rat
BYOC distortion+ with mods
boss TU-2
second row:
behringer ultra octaver
screamer (modded TS9 clone)
murph II (modded big muff clone)
boss SD-1 (yes, i did some mods to this one too)
digitech digiverb
third row:
ibanez PD7 phat-hed bass overdrive
face (silicon fuzz face with added controls)
MXR micro amp
red llama clone
rangemaster clone
artec fuzztown
botton row:
danelectro fab overdrive
sovtek big muff
EHX big muff with tons of mods
- zotglen
- PAT. # 2.972.923
- Posts: 108
- Joined: Fri Nov 30, 2007 2:51 am
- Location: Uppsala, Sweden
- Contact:
Re: Post pics of your entire pedal collection!
Jonas! No delay?
- mynameisjonas
- Admin
- Posts: 12703
- Joined: Tue Sep 12, 2006 5:55 am
- Location: Stockholm, Sweden
- Contact:
Re: Post pics of your entire pedal collection!
nope. a few years ago i lost the power adapter to my DMM, and getting a new one through musikbörsen took almost six months. and in that time i was sorta weaned off the whole delay thing, so when the adapter finally arrived i sold the pedal (to erik from sick oakes).
- peterherman
- PAT. # 2.972.923
- Posts: 1701
- Joined: Thu Jan 08, 2009 7:21 pm
- Location: DC...OK, Arlington.
- Contact:
Re: Post pics of your entire pedal collection!
mynameisjonas wrote:
second row:
screamer (modded TS9 clone)
third row:
face (silicon fuzz face with added controls)
red llama clone
How did you do the graphics on the Screamer and the Face: silkscreen or decal?
Also, how do you like the Red Llama clone? I'm thinking of building one from GGG.
Even though you can't expect to defeat the absurdity of the world, you must make that attempt. That's morality, that's religion. That's art. That's life.
--Phil Ochs
--Phil Ochs
- mynameisjonas
- Admin
- Posts: 12703
- Joined: Tue Sep 12, 2006 5:55 am
- Location: Stockholm, Sweden
- Contact:
Re: Post pics of your entire pedal collection!
they're laser printed decals. i'm not 100% happy with them. they look fine from a distance, but up close you notice that the color is kinda patchy. plus the clear coat i used was really brittle (you can see it's already chipping on the screamer).peterherman wrote:mynameisjonas wrote:
second row:
screamer (modded TS9 clone)
third row:
face (silicon fuzz face with added controls)
red llama clone
How did you do the graphics on the Screamer and the Face: silkscreen or decal?
Also, how do you like the Red Llama clone? I'm thinking of building one from GGG.
the red llama is a very nice sounding pedal, but it's a bit anonymous for my taste. not enough 'mid-punch' or watchamacallit. but it sounds fantastic on bass
- panoramic
- PAT. # 2.972.923
- Posts: 16935
- Joined: Tue Aug 12, 2008 7:09 pm
- Location: baltimore, md.
Re: Post pics of your entire pedal collection!
the boba fuzz rules, i want one of those
I used to be cool, now I just complain about prices.
- Pacafeliz
- PAT. # 2.972.923
- Posts: 18570
- Joined: Sun Jul 29, 2007 6:34 pm
- Location: Cococologne, Germany
Re: Post pics of your entire pedal collection!
well i love it. it's no small stone for sure, but sometimes you don't need SO much phasing.TheodorJ wrote: Hey, Pat. How do you like that Univox phaser? I think Adam Franklin used to use one of those in addition to a Small Stone.
i'll be using it on our Dark Side of the Moon and upload some live vids.
well worth the $60 i paid for it!
Pat.
i love delay SO much ...that i procrastinate all the time.